capstone project electrical engineering

CS Electrical & Electronics

Top 100 Capstone Project Ideas For Engineering Students In 2022

Hello guys, welcome back to my blog. In this article, I will share the top 10 capstone project ideas for engineering students in 2021, what is a capstone project, topics for a capstone project, etc.

If you have any electrical, electronics, and computer science doubts, then  ask questions . You can also catch me on Instagram –  CS Electrical & Electronics .

Also, read:

• Top 10 MATLAB Projects For Electrical And Electronics Engineers .
• Final Year Projects For Electrical Engineering .
• 100 + Electrical Engineering Projects For Students .

Capstone Project Ideas

What is a Capstone Project?

A capstone project is done for one year by students, they will work on a project for two-semester. In the capstone project, students will study the research papers in deep and design their project by using some tools.

Capstone Project Ideas Are

01. Testing Method and Application for Impulse- Dispersed Current Around Earthing Devices in Power Transmission Networks

02. Fuzzy Approach to Student-Project Allocation (SPA) Problem .

03. Maritime DC Power System With Generation Topology Consisting of Combination of Permanent Magnet Generator and Diode Rectifier .

04. An Urban Charging Infrastructure for Electric Road Freight Operations: A Case Study for Cambridge UK .

05. Low-Voltage Unipolar Inverter Based on Top-Gate Electric-Double-Layer Thin-Film Transistors Gated by Silica Proton Conductor .

06. Safety Distance Analysis of 500kV Transmission Line Tower UAV Patrol Inspection .

07. Analysis of Electrical Impedance Myography Electrodes Configuration for Local Muscle Fatigue Evaluation Based on Finite Element Method .

08. A Comprehensive Review of Wireless Charging Technologies for Electric Vehicles .

09. Electric Vehicle Battery Cycle Aging Evaluation in Real-World Daily Driving and Vehicle-to-Grid Services .

10. Coordinated Scheduling for Improving Uncertain Wind Power Adsorption in Electric Vehicles—Wind Integrated Power Systems by Multiobjective Optimization Approach .

11. Sub-THz Circularly Polarized Horn Antenna Using Wire Electrical Discharge Machining for 6G Wireless Communications .

12. Space Vector Modulation for Distributed Inverter-Fed Induction Motor Drive for Electric Vehicle Application .

13. Bidirectional Three-Level Cascaded Converter With Deadbeat Control for HESS in Solar-Assisted Electric Vehicles .

14. Harmonics and Interharmonics Analysis of Electrical Arc Furnaces Based on Spectral Model Optimization With High-Resolution Windowing .

15. Ageing: Causes and Effects on the Reliability of Polypropylene Film Used for HVDC Capacitor .

16. The Probabilistic Evaluation of Net Present Value of Electric Power Distribution Systems Based on the Kaldor–Hicks Compensation Principle .

17. Decentralized Charging of Plug-In Electric Vehicles and Impact on Transmission System Dynamics .

18. HPC-Based Probabilistic Analysis of LV Networks With EVs: Impacts and Control .

19. Development of a Portable Electrochemical Impedance Spectroscopy System for Bio-Detection .

20. Risk Assessment on Offshore Photovoltaic Power Generation Projects in China Using D Numbers and ANP .

21. Analysis of Dynamic Processes in Single-Cell Electroporation and Their Effects on Parameter Selection Based on the Finite-Element Model .

22. A New Coil Structure and Its Optimization Design With Constant Output Voltage and Constant Output Current for Electric Vehicle Dynamic Wireless Charging .

23. A Graphical Game Approach to Electrical Vehicle Charging Scheduling: Correlated Equilibrium and Latency Minimization .

24. Sensitivity Guided Image Fusion for Electrical Capacitance Tomography .

25. Design and Building of an Automatic Alternator Synchronizer Based on Open-Hardware Arduino Platform .

26. A Phaseless Microwave Imaging Approach Based on a Lebesgue-Space Inversion Algorithm .

27. Direct Phase-Change Cooling of Vapor Chamber Integrated With IGBT Power Electronic Module for Automotive Application .

28. Vulnerability Assessment of Equipment Excited by Disturbances Based on Support Vector Machine and Gaussian Process Regression .

29. A New Finite-Element Method to Deal With Motion Problem of Electromagnetic Rail Launcher .

30. A Novel Ultralow RON,sp Triple RESURF LDMOS With Sandwich n-p-n Layer .

31. Design and Verification Test of an HTS Leakage Flux-Controlled Reactor .

32. An Ordered Curtailment Strategy for Offshore Wind Power Under Extreme Weather Conditions Considering the Resilience of the Grid .

33. Current Reconstruction of Bundle Conductors Based on Tunneling Magnetoresistive Sensors .

34. WSN-Based Measurement of Ion-Current Density Under High-Voltage Direct Current Transmission Lines .

35. Influence of Rotor-Pole Number on Electromagnetic Performance of Novel Double-Rotor Hybrid Excited Axial Switched-Flux Permanent-Magnet Machines for EV/HEV Applications .

36. Electromagnetic Vibration and Noise of the Permanent-Magnet Synchronous Motors for Electric Vehicles: An Overview .

37. Incentive-Compatible Market Clearing for a Two-Stage Integrated Electricity-Gas-Heat Market .

38. Teaching Power Electronics With a Design-Oriented, Project-Based Learning Method at the Technical University of Denmark .

39. A Circuits and Systems Perspective of Organic/Printed Electronics: Review, Challenges, and Contemporary and Emerging Design Approaches .

40. MgO Based Magnetic Tunnel Junctions With Co20Fe60B20 Sensing Layer for Magnetic Field Sensors .

41. Reduction of Offset Field in Top-Pinned MTJ With Synthetic Antiferromagnetic Free Layer .

42. Cost-Effective Printed Electrodes Based on Emerging Materials Applied to Biosignal Acquisition .

43. A Review and Analysis of Automatic Optical Inspection and Quality Monitoring Methods in Electronics Industry .

44. Improved English Immersion Teaching Methods for the Course of Power Electronics for Energy Storage System in China .

45. New Improved Model and Accurate Analytical Response of SiPMs Coupled to Read-Out Electronics .

46. Graphene Field-Effect Transistors for Radio-Frequency Flexible Electronics .

47. Statistical Write Stability Characterization in SRAM Cells at Low Supply Voltage .

48. Teaching Electronics to Aeronautical Engineering Students by Developing Projects .

49. Improved ON-State Reliability of Atom Switch Using Alloy Electrodes .

50. Hybrid Thermal Modeling to Predict LED Thermal Behavior in Hybrid Electronics .

51. Fabrication of Phase-Shifted Fiber Bragg Grating by Femtosecond Laser Shield Method .

52. Humidity Sensor Based on Fabry–Perot Interferometer and Intracavity Sensing of Fiber Laser .

53. Switching Performance Analysis of Vertical GaN FinFETs: Impact of Interfin Designs .

54. Analysis of Thickness Variation in Biological Tissues Using Microwave Sensors for Health Monitoring Applications .

55. Ultrasound Measurement Using On-Chip Optical Micro-Resonators and Digital Optical Frequency Comb .

56. EMFi-Based Ultrasonic Sensory Array for 3D Localization of Reflectors Using Positioning Algorithms .

57. Single-Mode Quantum Cascade Laser Array Emitting From a Single Facet .

58. Superior Implementation of Accelerated QR Decomposition for Ultrasound Imaging .

59. Resonant-Type Piezoelectric Screw Motor for One Degree of Freedom Positioning Platform Application .

60. Simultaneous Wireless Information and Power Transfer in Cellular Two-Way Relay Networks With Massive MIMO .

61. Dual-Band Bandpass Filter With Wide Stopband Using One Stepped-Impedance Ring Resonator With Shorted Stubs .

62. A Novel Wide-Angle Scanning Phased Array Based on Dual-Mode Pattern-Reconfigurable Elements .

63. Full-Duplex SWIPT Relaying Based on Spatial-Modulation .

64. An Academic Approach to FPGA Design Based on a Distance Meter Circuit .

65. Direct SMT Interconnections of Large Low-CTE Interposers to Printed Wiring Board Using Copper Microwire Arrays .

66. Integrated Reconfigurable Silicon Photonics Switch Matrix in IRIS Project: Technological Achievements and Experimental Results .

67. Lifelogging Data Validation Model for Internet of Things Enabled Personalized Healthcare .

68. Adaptive Zeroing-Gradient Controller for Ship Course Tracking With Near Singularity Considered and Zero Theoretical Tracking Error .

69. Radio Interface Evolution Towards 5G and Enhanced Local Area Communications .

70. Reliability Assessment Model of IMA Partition Software Using Stochastic Petri Nets .

71. Medium-Voltage Power Converter Interface for Multigenerator Marine Energy Conversion Systems .

72. A Hybrid Prognostics Technique for Rolling Element Bearings Using Adaptive Predictive Models .

73. A Hybrid Method of Remaining Useful Life Prediction for Aircraft Auxiliary Power Unit .

74. Insensitivity to Humidity in Fabry–Perot Sensor With Multilayer Graphene Diaphragm .

75. Design and Testing of a Kinetic Energy Harvester Embedded Into an Oceanic Drifter .

76. 3-D Dual-Gate Photosensitive Thin-Film Transistor Architectures Based on Amorphous Silicon .

77. Automatic Structure Generation and Parameter Optimization for CMOS Voltage Reference Circuit .

78. CNN-Based Intra-Prediction for Lossless HEVC .

79. Resource Allocation for D2D Links in the FFR and SFR Aided Cellular Downlink .

80. A Hybrid EF/DF Protocol With Rateless Coded Network Code for Two-Way Relay Channels .

81. An Efficient Task Assignment Framework to Accelerate DPU-Based Convolutional Neural Network Inference on FPGAs .

82. Phase Calibration of On-Chip Optical Phased Arrays via Interference Technique .

83. A Multi-Carrier-Frequency Random-Transmission Chirp Sequence for TDM MIMO Automotive Radar .

84. High-Stability Algorithm in White-Light Phase-Shifting Interferometry for Disturbance Suppression .

85. Polarimetric Calibration Scheme Combining Internal and External Calibrations, and Experiment for Gaofen-3 .

86. Wireless Wearable Magnetometer-Based Sensor for Sleep Quality Monitoring .

87. Power-Gated 9T SRAM Cell for Low-Energy Operation .

88. An Improved Matrix Generation Framework for Thermal Aware Placement in VLSI .

89. Trip-Point Bit-Line Precharge Sensing Scheme for Single-Ended SRAM .

90. Intelligent Reflecting Surfaces to Achieve the Full-Duplex Wireless Communication .

91. Toward Energy-Awareness Smart Building: Discover the Fingerprint of Your Electrical Appliances .

92. Analysis of the starting transient of a synchronous reluctance motor for direct-on-line applications .

93. Motor Design and Characteristics Comparison of Outer-Rotor-Type BLDC Motor and BLAC Motor Based on Numerical Analysis .

94. IEEE Draft Guide for Motor Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations .

95. A Novel Track Structure of Double-Sided Linear PM Synchronous Motor for Low Cost and High Force Density Applications .

96. A Novel Dual Three-Phase Permanent Magnet Synchronous Motor With Asymmetric Stator Winding .

97. A new two-motor drive to control a two-phase induction motor and a DC motor .

98. Development of a 7.5kW High Speed Interior Permanent Magnet Synchronous Spindle Motor for CNC Milling Machine .

99. Optimal Design of the 2nd Generation TMED Traction Motor .

100. Power factor correction and power quality improvement in BLDC motor drive using SEPIC converter

These are the different capstone project ideas from IEEE website. I hope this article “capstone project” may help you all a lot. Thank you for reading.

• 10 Tips To Maintain Battery For Long Life, Battery Maintainance
• 10 Tips To Save Electricity Bills, Save Money By Saving Electricity
• 100 (AI) Artificial Intelligence Applications In The Automotive Industry
• 100 + Electrical Engineering Projects For Students, Engineers
• 100+ C Programming Projects With Source Code, Coding Projects Ideas
• 1000+ Control System Quiz, Top MCQ On Control System
• 1000+ Electrical Machines Quiz, Top MCQs On Electrical Machines
• 1000+ Electronics Projects For Engineers, Diploma, MTech Students

Related Posts

Top 14 Back-End Frameworks For Web And App Developers In 2022

Hello guys, welcome back to my blog. In this article, I will discuss the top 14 back-end frameworks for web…

Why Choke And Starter Are Used In Tube lights Or Fluorescent Tube

Difference Between Machine Learning Artificial Intelligence Deep Learning

Hello guys, welcome back to my blog. In this article, I will discuss the difference between machine learning, artificial intelligence,…

WhatsApp us

Senior design projects in Electrical and Computer Engineering

The Senior Design Project provides a capstone experience for undergraduate students in the Department of Electrical and Computer Engineering. Students work in teams of 3-4 students in this year long course sequence to design and prototype a system of their choice.

Past projects have included a variety of topics ranging from home automation systems to ultra wide band wireless links, assistive robots, and wireless drumsticks. Each team is advised by a faculty member in the department and projects undergo several formal reviews. The learning goals for the senior design project include technical design, team work, presentation skills, an understanding of realistic constraints, economics, and ethics.

Visit the Senior Design Project  website to see this year's teams.

Global footer

• ©2024 University of Massachusetts Amherst
• Site policies
• Non-discrimination notice
• Accessibility
• Terms of use

ECE Capstone Projects

Add custom text here or remove it

About the ECE Capstone Course

The Carnegie Mellon University Department of Electrical and Computer Engineering offers an ECE Design Experience course (18-500) every semester.  As part of this class, students work in teams to develop interdisciplinary capstone projects over the course of a semester.  The students start from a blank slate, developing a problem statement, and iterating through the design process, to build a working project under several real-world constraints.

This site provides links to both completed and ongoing projects, where students can document their entire design process.  We will periodically feature some of the most successful and/or interesting projects.

Fall 2024 Capstone Projects

• Team A0: Scrabbletron
• Team A2: 🌊Splash💦
• Team A4: AutoAlert
• Team A5: WalkGuard
• Team A6: Search and Rescue Drone
• Team B2: Hey CHEF!
• Team B4: InSync
• Team B5: Style Sprout
• Team B6: IntelliSense
• Team B7: EcoSort
• Team C0: DrumLite
• Team C2: StudyBuddyBot
• Team C3: MapSweep
• Team C4: BACK IN TUNE
• Team C5: The Sound of Sight
• Team C6: SkateBack

Spring 2024 Capstone Projects

• Team A0: Brailliant
• Team A1: Pour-over-and-over
• Team A2: HoverRail
• Team A3: Bike Buddy
• Team A4 - BeatLock
• Team A5: Chargin'
• Team A6: Aqualotl
• Team A7: deciBright
• Team A8: Pongpal
• Team B0: EchoBudget
• Team B1: Homerover
• Team B2: SmartStand
• Team B3: Music Mirror
• Team B5: Guardian
• Team B6: EyeSPy
• Team B7: Scotty Maps
• Team B8: Landhopper
• Team C0: CueTips
• Team C1: WeARClean
• Team C2: TailorBot Room Designer
• Team C3: Fast Grocery Checkout
• Team C4: maGomoku
• Team C5: FPGA-AMP
• Team C6: Cameraman
• Team C7: Search and Shine
• Team C8: BenchSense
• Team D0: Nav-Assist
• Team D1: Sugar DB
• Team D2: SightMate
• Team D3: IntelliStorage
• Team D4: UNOmatic
• Team D5: Sonic Score Saxophonics
• Team D6: Analog Optimization
• Team D7: EchoSign
• Team D8: Traffix
• Team E0: Focus Tracker App
• Team E1: GiveMeASign
• Team E2: NutrientMatch
• Team E3: Crisis Critters
• Team E4: The Embellisher
• Team E5: Sous-Chef
• Team E6: TransLingualVisionary
• Team E7: IntelliRack
• Team E8: TableCast

Fall 2023 Capstone Projects

• Team A0: Go Learning Buddy
• Team A1: Mouseketool
• Team A2: SuperFret
• Team A3: N-body
• Team A4: DigiBraille
• Team A5: FollowMe
• Team B0: AutoErasing
• Team B1: Circuit Simulpaper
• Team B2: Harmony Instruction Tool
• Team B3: Scenescribe
• Team B4: Taichine
• Team B5: Transcriber
• Team B6: SoundSync

Spring 2023 Capstone Projects

• Team A0: Tactile Chess
• Team A1: Multi-room Space Heater Temperature Control
• Team A2: CyberJewelry
• Team A3: LiftOff
• Team A4: TeleTouch
• Team A5: Dr. Green
• Team A6: Flying Under the Radar
• Team A7: Jack of All Trades
• Team A8: Sensor Suit
• Team B0: No Time to Dine
• Team B1: FP(KEY)A
• Team B2: Can U Cardio?
• Team B3: Mobile Steering
• Team B4 : Robotic Trash Concierge
• Team B5: LaserDrop
• Team B6: Anywhere Piano
• Team B7: PetSTAR
• Team B8: FireEscape
• Team C0: People Counter
• Team C1: B.L.I.N.D.S.
• Team C2: WiSpider
• Team C3: Best Ball
• Team C4: PosePal
• Team C5: DriveWise
• Team C6: Picture This!
• Team C7: 8 Ball lifeguard
• Team C8: ScentBot
• Team D0: KaraoKey
• Team D1: The Emperor’s New Instrument
• Team D2: Keynetic
• Team D3: Meal By Words
• Team D4 - Synesthesia
• Team D5: Symphony AI
• Team D6: The Well of Maxwell
• Team D7: accompanyBot
• Team D8: Musician's Scribe

Fall 2022 Capstone Projects

• Team A0: Crosswalk Guardian
• Team A1: FIRE AWAY
• Team A2: PARROT (Parallel Asynchronous Robots, Robustly Organizing Trucks)
• Team A3: Where is the Barcode?
• Team A4: Recycle Queen Robot
• Team B0: Seamless Autonotator
• Team B1: Aware-ables
• Team B2: Talking Piano
• Team B3: ScottySeat

Spring 2022 Capstone Projects

• Team A0: NeuroController
• Team A1: Paymodoro
• Team A2- The Bat-Belt
• Team A3: FlexDance
• Team A4: VR Ping Pong
• Team A5: Hit It!
• Team A6: Touch TrackIR
• Team B0: Where's the Milk?
• Team B1: Nature Photography Robot
• Team B2: DrawBuddy
• Team B3: FreshEyes
• Team B4: Ride-ar
• Team B5: KBBQ for KBBeginners
• Team B6: Food Tracker
• Team C0: CodeSwitch
• Team C1: kerby
• Team C2: LearNet
• Team C3: Smart Traffic Camera
• Team C4: CryptoHash
• Team C5: Smart Parking Lot with Monitoring and Automated Vehicle Guidance
• Team C6: Proj^2
• Team D0: Accessibility Pi/O
• Team D1: Is Mayonnaise an Instrument?
• Team D2: PROGNOSTICATOR-6
• Team D3: WoodwindMania
• Team D4: My-Flection
• Team D5: W.R.I.S.T.
• Team D6: EyeHear
• Team E0: To the 60's and Back
• Team E1: FPGA Accelerated Fluid Simulation
• Team E2: SAR
• Team E4: Occupancy Monkey
• Team E5: ASL Learning Platform
• Team E6: waitr

Fall 2021 Capstone Projects

• Team A0: D.R.O.P.
• Team A1: FPGA-Assisted Verification
• Team A2: Virtual Whiteboard
• Team A3: FreeSeats
• Team A4: ShelfBuddy
• Team A5: TracKat
• Team B0: Real Time Video Upscaling
• Team B1: Ultimate Chess
• Team B2: Lights Out
• Team B3: BikewardsView
• Team B4: Gesture Glove

Spring 2021 Capstone Projects

• Team B0 : Autonomous Debris Collector
• Team B2: Smart-Wardrobe
• Team B3: FarmFresh
• Team B4: Chess Teacher
• Team B5: Work it
• Team B6: AutoVot
• Team B7: CarMa
• Team B8 - Smart Mirror
• Team B9: Hawkeye
• Team C0: Backpack Buddy
• Team C1: FP-GAme
• Team C2: WiFi Localization
• Team C3: Magic Mice
• Team C4: HoloPyramid
• Team C5 - AR FruitNinja 🍉
• Team C6: Bin There Dump That
• Team C8: Whiteboard Pal
• Team C9: GrubTub
• Team D0: BARI (Bluetooth Audio Rejiggering Instrument)
• Team D1: SharpCam
• Team D2: xWalk
• Team D3 SmolKat: A Smart Kitchen Assistant
• Team D4: Travelling Mind
• Team D5: Acapella
• Team D6: StenoPhone
• Team D7: Pitch Perfect
• Team D8: conFFTi
• Team E0: Tartan's Gambit
• Team E1: Drivaid
• Team E2: Barista Bros
• Team E3: Graduating Gardeners
• Team E4: Automatic Gentleman
• Team E5: Hot Pot Bot
• Team E6: SHTTL <Xander L, Manny H, Joanna W>
• Team E7: PokerCam
• Team E8: Smart Poker Table
• Team E9: Espresso Overflow
• Team B1: FocusED

Fall 2020 Capstone Projects

• Team A0: Falcon: the Pro Gym Assistant (FPGA)
• Team A1: BLOKUS
• F20 TEAM A2
• Team A4: Fmpga
• Team A6 : Thermonitor
• Team B1: ChaseMe Alarm Clock
• iRecruit | Team B2
• Team B4: Smart Library
• ASL Interpreter
• MiGroBox: A 3D Printer For Greens

Spring 2020 Capstone Projects

• A0 - AutoPuzzlr
• Team A1: Cooperative vs Non-cooperative Autonomous Driving
• Project Belka
• Team A6: Edge Computing For Smart Home Devices
• Team A7: Scalable Machine Learning Using FPGAs
• Team B0: KATbot
• Team B1: Asterism
• RIP: Robotic Indoor Plotting
• Team B3: 2D23D
• Team B4 : That's So Fetch
• Team B5: Codeblox
• Real Time Localization System for Sports
• Team B7: Resisthor
• Team C1: Tetris: a Frame Perfect Game Adventure
• Team E0: Sonicam
• Team E1: 3D Printing Error Detection System
• Caprice (Team E3)
• Team E4: Run With It
• Team E6, Carnegie Mellon ECE Capstone, Spring 2020
• Team E7: Body Buddy
• Team F0: *wave* Google
• Team F2: Cookiebot, A Gesture Based Home Robot
• Team F3: No Face
• Team F5: E-MO

• All Electronics Projects
• Premium DIY Electronics Projects
• Community Projects
• NEW | DIY Webinars
• Submit Your Project
• Mini Projects
• College Projects
• Advanced Projects
• Super Innovative Projects
• AI/ML Projects
• Reference Designs
• S/W Projects
• Tech Trends
• Tech updates
• Aerospace & Defence
• Communication & Networks
• Energy & Power
• LEDs & Lighting
• Testing Times
• Thought Leaders
• Industry Powered Content
• NEW @ Electronicsforu.com
• Tech Updates
• Innovative Components
• New Products
• Components Corner
• Press Releases
• NEW | EFY Prime
• Premium Content
• Startups & Innovators
• Electronics Calculators
• DIY Webinars
• Explore Components on DigiKey

More results...

Top 35+ Electrical Projects Ideas for Engineering Students

Engineers are always in search of new electrical projects, and finding meaningful projects makes that search worthwhile. Listed below are some electrical projects for such engineers.

A lot of them may deal in a higher power than electronics engineers are used to, hence safety first.

These hand-picked innovative Electrical Projects are simple as well as interesting and contain a few mini projects too. The EEE Students can use these project kits as their final year project.

Recommended: Mini Projects for Engineers

The list contains a total of 35+ Electrical projects for engineering students. These projects will be very helpful to Electrical Engineering Students.

List of Top Electrical Projects

1. dual axis solar power tracker system.

This system requires the involvement of a wide range of engineering including mechanical, electrical, and electronics. The mechanical part would involve designing a smooth gear system to move as per requirement. The electrical part would be the working of solar panel and battery requirement.

The electronics would involve designing the sensor system that would generate commands for the gear system to act accordingly. The system employs spur gear for the implementation of the dual-axis solar tracker. The system is implemented using Atmel IC AT89C51.

This electrical project is available at Dual Axis solar tracker system .

2. 5V DC To 48V DC Converter

This circuit presents a simple and low-cost DC-to-DC converter for phantom power supplies used in mixing consoles, microphone preamplifiers, telephone systems, and similar equipment.

This project is available at 5V DC To 48V DC Converter .

3. Electric Vehicle Battery Charging Solutions

The application note below should help designers make their own electric vehicle battery charging solutions. If required, help is available from the company.

The Design Guide is available at Design Your Own Electric Vehicle Battery Charging Solutions .

4. USB Power Electric Socket

The circuit system of a versatile USB power socket safely converts the 12V battery voltage into stable 5V.

This circuit system is available at USB Power Socket

5. DIY Energy Meter

Presented here is a simple energy meter using Analog Device’s ADE7757 chip for single-phase, 2-wire (phase and neutral) systems used in households.

This circuit system is available at Energy Meter

6. Joystick-Controlled Industrial Automation System

This project can be used to control up to four industrial electrical appliances with the help of a joystick and an Arduino Nano board.

This project is available at Make This Joystick-Controlled Industrial Automation System

7. Brushless DC Motor Driver

The brushless DC motor driver circuit described here uses a DRV10866 driver IC to drive a small BLDC fan, without using any position sensors.

This project is available at Brushless DC Motor Driver

8. HVDC Power Supply Design

Circuits like Geiger counters, insect zappers, Nixie tubes, and sensors require high-voltage direct-current (HVDC) supplies. There are various types of HVDC supplies available in the market, including voltage doublers or quadruple, flyback converters, and boost converters.

Some of these have low current output capacity. But with the right calculations using basic boost conversion formulae, we may achieve HVDC supplies capable of clean and high current capacity. Presented here is a boost converter design using an MC34063 DC-DC converter.

This project is available at HVDC Power Supply Design

9. Micro Inverter Electrical Project

A simple low-power inverter circuit is described here, which converts 12V DC into 230V AC. It can be used to power very light loads like night lamps and cordless telephones but can be modified into a powerful inverter by adding more MOSFETs.

This project is available at Micro Inverter

10. Automatic Anchor Light

Federal and international regulations require boats to carry lights during sunset, sunrise, and in conditions with restricted visibility. The number and colors of light vary with the size of the vessel. A masthead anchor light is out of fashion as it is too high above the water level.

This makes it difficult to judge the position of the boat, especially in a pitch-dark anchorage.

This project is a compact yet inexpensive automatic anchor light integrated with an ambient light sensor that turns it on and off automatically.

This project is available at Automatic Anchor light

11. High-Impedance Audio Buffer With JFET

The buffer circuit described here is useful in enhancing the AC input impedance of audio amplifiers used with pickups in musical instruments. Signal sources for amplifiers and passive pickups for electric guitars require very high impedance of over 5-mega-ohm.

This can be achieved easily with a junction field-effect transistor (JFET) but may require a special design of the printed circuit board ( PCB ), appropriate construction techniques of the box, and proper cables and connectors.

This project provides a solution for a high-impedance, low-cost, low-quiescent current, buffer-follower based on PN4393 JFET.

This project is available at High-Impedance Audio Buffer With JFET

12. PIN Diode-Based Fire Sensor

This is an ultra-sensitive fire sensor that activates an alarm when it detects fire. In this circuit, a sensitive PIN diode is used as a fire sensor for longer-range fire detection. It detects visible light and infrared (IR) in the range of 430 nm – 1100 nm.

Visible light and IR from the fire activate the sensor to trigger the alarm. It also detects sparks in the mains wiring and if these persist, it gives a warning alarm. The anode can easily be identified from the top-view flat surface of the photodiode.

A small solder point to which a thin wire is connected is the anode and the other one is the cathode terminal.

This project is available at PIN Diode-Based Fire Sensor

13. Plus-Minus 5V Supply From 9V Battery

Op-amps require a dual-polarity supply for proper operation. When working with a battery supply, it becomes difficult to get a dual power supply for the op-amps.

Presented here is a simple circuit that provides ±5V from a 9V battery. This is one of the most interesting projects among Electrical Engineering Project Ideas.

This project is available at   Plus-minus 5V Supply From 9V Battery

14. Infrared Motion-Sensing Relay Switch

This project is designed for use with all kinds of medium-power automobile/domestic 12V DC loads. It is a simple solid-state relay (SSR) switch, controlled by a standard passive infrared ( PIR ) motion sensor module.

A PIR sensor is an electronic device that can measure IR light radiating from objects in its field of view. Apparent motion is detected when an IR source with one temperature (such as a human being) passes in front of an IR source with another temperature (such as a wall).

The PIR sensor module, centered on a PIR sensor, has elements made of crystalline material that generates an electric charge when exposed to IR radiation.

This project is available at Infrared Motion-Sensing Relay Switch

15. Low-cost LPG Leakage Detector

The circuit for an LPG leakage detector is readily available in the market, but it is extremely expensive and usually based on a microcontroller (MCU). This project presents a low-cost LPG detector that you can build a circuit easily.

The main objective of the circuit is to detect LPG leakage anywhere. At the heart of the circuit is dual comparator IC LM393 (IC2). It is used to compare two different voltages, in this case, reference voltage and MQ-6 gas sensor output voltage.

This project is available at Low-Cost LPG Leakage Detector

16. Low-Cost Dusk-Dawn Controller

This dusk-dawn controller is built around a light-dependent resistor among other components. The common battery supply is used for operating the circuit as well as for load, that is, for power LED/small inverter circuits.

Resistors work as voltage dividers and current limiters in the circuit. LEDs are used as circuit deactivation indicators. An n-channel MOSFET is used for the switching action of an LED light.

This project is available at Low-Cost Dusk-Dawn Controller

17. Auto Power Switching Mains, Solar Inverter, or Generator

This project is based on the AEIOU heuristic framework of the Design Engineering Approach. Design for Performance, Safety, and Reliability is ensured in terms of switching modules. Design for Ergonomics and Aesthetics is ensured in terms of Priority set by the user regarding the availability of Power Source.

Design for Manufacturability and Assembly is ensured in terms of Generator, Inverter, and Solar Plates.

Also, based on choice and availability, different circuits using Eagle can be worked upon.

This project is available at Auto Power Switching Mains, Solar Inverters, or Generator

18. Signal Generator and Inverter Using NE555 Timers

Often we require a squarewave signal generator with adjustable frequency, almost equal high and low output pulses, and adjustable amplitudes.

Here we present a simple, useful, and low-cost signal generator built around NE555 timers. Using external switches, you can control or select frequency ranges as per your requirements.

This project is available at Signal Generator and Inverter Using NE555 Timers

19. Configurable RS232 to TTL to I2C Adapter

RS232 signals cover a much longer distance than standard TTL and I2C signals.

These signals have better noise immunity as well. RS232 is a well-known standard supported by many popular ICs and therefore is still widely used. Sometimes we want to send TTL and I2C signals over a longer distance. This project describes how these signals can be extended through RS232 lines.

This project is available at Configurable RS232 to TTL to I2C adapter

20. Vibration Activated Smart CRO Probe

This is a simple, low-cost, energy-saving, and device-saving circuit for an electronics lab, service center, electronics workshop, or wherever a CRO is in use. Generally, in a repair station, a CRO is used for a very short time. But in most cases, the user fails to switch off the CRO immediately after use.

The service engineer mostly concentrates on faults rather than noticing whether the CRO is on or off. A vibration sensor turns the CRO off when the probe is idle for a specified amount of time.

This project is available at the Vibration Activated smart CRO probe

21. 4 Channel Multi-mode Audio Amplifier

Sometimes we need configurable multichannel amplifiers for experiments or for use in offices or schools. Here is a project based on TDA1554Q, configured for multi-mode functions with four-channel outputs. It has four channels and each channel can provide around 11W over a load of 2 ohms and around 6W over a load of 4 ohms.

The circuit will also work with loads of 4 ohms to 16 ohms. The gain of each channel is fixed at 20dB in single-channel mode and 26dB in BTL mode.

This project is available at 4 channel multi-mode Audio amplifier

22. Design and analysis of single-stage amplifier using C++

Many formulae are required to calculate the parameters involved in a circuit of a transistor-based audio amplifier. Some of these values involve resistors, coupling capacitors, bypass capacitors, power consumption, and the current flowing through different components.

A good amount of time is required to calculate such parameters even with a regular calculator. Using a C++ program, all the parameters can be calculated in a fraction of a second.

This project presents a single-stage transistor audio amplifier that requires a total of 19 formulae to obtain the values of components and analyze the circuit.

This project is available at Design and Analysis of Single-stage Amplifier using C++ 

23. Four-channel Video and Audio Sequencer

This next project is a simple circuit for switching your CCTV camera outputs sequentially. It switches four video and audio channels sequentially, one at a time. It is built around a 555 timer few other components. The timer is configured as an astable multi-vibrator.

A single-side PCB of the four-channel video and audio sequencer is provided along with the component layout. After assembling the circuit on the PCB, enclose it in a suitable plastic box.

This project is available at a Four-channel video and audio Sequencer

24. Automated USB-controlled Power Switch

Power for TV and set-top box (STB) is derived from a common switchboard. The switched-mode power supply (SMPS) of the TV continues to draw a small amount of power from the mains and the STB is not switched off when you switch off the remote.

This project presents a circuit that can control the main power of an LED TV and the DTH STB. It also protects the devices from harmful initial surges when the power comes back after a power failure.

This project is available at Automated USB-controlled Power Switch

25. 1kW Sine Wave Inverter

An inverter provides power backup for mains-based appliances in the event of a power failure. Most of the inverters available in the market have complicated circuit designs and are not very economical. Some of them produce a square-wave output, which is undesirable for inductive loads.

This project presents a simple inverter circuit that produces 50Hz quasi-sine-wave output using a single IC CD4047 and some discrete components making it a very cost-effective solution.

This project is available at 1kW sine wave Inverter

26. Four Frequency Generator

There is a need for TTL and CMOS signals by stable frequency sources for the development, testing, and maintenance of digital and analog electronic circuits. These sources are also useful for fast-checking oscilloscopes, probes, multimeters, frequency meters, and other measurement equipment.

This project proposes a circuit that produces fixed frequencies of 4MHz, 6MHz, and 10MHz and adjustable square waves with variable frequencies from around 10Hz to more than 100kHz.

This project is available at 4 Frequency Generator

27. Programmable 3-Phase Controller

A programmable time switch is useful in designing an automatic on/off controller for the 3-phase electric motor. This next project proposes a system with two programmable time switches for setting the starting and stopping times of the motor.

Two control circuits interface with the start/stop switches of the 3-phase motor starter. There is a provision for setting days of the week for the controller to function as well.

This project is available at Programmable 3 phase Controller for ON/OFF motor

28. High Power LED Stroboscope

A stroboscope is a convenient and accurate instrument to measure the speeds of rotating objects in homes or industries. One can use it to find the speed of fans, motors, or any other rotating object.

It is a flashing light that provides sharp light pulses at a variable rate. An object rotating with a frequency matching the pulsed light is observed as stationary.

This project is available at High Power LED Stroboscope

29. Password-Based Circuit Breaker

A circuit breaker protects electrical circuits from damage in case of overload or short circuit. Its basic function is to detect a fault condition and interrupt current flow. The system uses an 8-bit microcontroller of the 16f877A family.

An EEPROM stores the password and is easily changeable. The password is entered through a keypad and a relay opens or closes the circuit breaker, which is indicated by a lamp.

This project is available at Password based circuit breaker

30. Over/Under Voltage Protection of Electrical Appliances

Presented here is an under/over-voltage protection circuit that protects refrigerators as well as other appliances from under & over-voltage. The operational amplifier IC LM324 (IC2) is used here as a comparator.

This project is available at Over/Under Voltage Protection of Electrical Appliances

31. DC Panel Meter using Arduino

Panel meters in regulated power supplies are used to display electrical parameters like voltage and current. Presented here is a circuit to display the DC voltage and current of power supplies, including DIY-type ones.

This project is available at DC Panel Meter using Arduino

32. Multi-Status Indicator Using Single RGB LED

The monitoring system in battery chargers, water-level indicators , etc. uses LEDs to indicate the status of certain conditions. Presented here is a multiple status indicator circuits that use a single RGB LED  for seven different indications.

This project is available at Multi-Status Indicator Using Single RGB LED

33. Simple Low Power Inverter

Here is a simple low-power inverter that converts 12V DC into 230-250V AC. It can be used to power very light loads like window chargers and night lamps, or simply give shock to keep intruders away. The circuit is built around just two ICs, namely, IC CD4047 and IC ULN2004 .

This project is available at Simple Low Power Inverter

34. Power-Saving Relay Driver

In many circuits, the switching action is performed by a relay, which in turn activates an external load. The power consumed by the relay may be unsuitable for battery-power system applications.

Here is a simple solution using some inexpensive components to considerably save power.

This project is available at Power-Saving Relay Driver

35. Automatic Water Pump Controller

Here’s an automatic water pump controller circuit that controls the water pump motor. The motor gets automatically switched on when water in the overhead tank (OHT) falls below the lower limit.

This project is available at the Automatic Water Pump Controller 

36. Mobile Cell Phone Charger

This is a circuit for a mobile cellphone charger that uses three NiCd cells or eight pencil cells to charge the battery connected at the output terminals.

This project is available at Mobile Cellphone Charger

37. Generate Power Using Microturbine

Presented here is the Hydropower Generation circuit that generates power from a water pipe in a building using a microturbine. The generated electricity can be used to charge batteries, which can be used for emergency lighting or other such purposes. The microturbines produce kinetic energy which in turn helps in Power Generation (Electricity).

This project is available at Generate Power Using Microturbine

Hope these electrical engineering project ideas were useful to you. If you have such interesting electrical project ideas, feel free to post them in the comment section below.

This article was first published on 18 October 2016 and was recently updated in June 2024.

• electrical projects

81 COMMENTS

its helpful..thank u

I want a more new I ideas for the agricultural quickly

How about a English grammar book instead? I have no idea what you just said my friend.

Should be: “an English grammar”. You also need it!

ha ha.. they are same

Hypocrite, lmfaoooo!

Hi Venkat, you can get electronics projects related to agriculture here .

we have found that in power system especially distribution system meet with huge voltage drop, now there is a way of mitigation of such issues. if you have any ideas about it, you can because it serious issues in country. thank you

Microcontroller based Smart load management system can be a solution

Its really amazing … it helped me alot in my final year project.

Thank you for your feedback.

Hello sir, I’m EEE student i want relate electrical engineering skills to agricultural field, to make go green, by avoiding fuels can you give some ideas on that topics. please its my humble request

U may use sensor or timer

I need a innovative ideas for the innovation day.I am currently pursuing diploma in Electrical Engineering. Can anyone help me

HI can i have yr email to assists me in my final year project?

I am an electrical engineering student in Ghana,I wish to use your project for my project so please help me with the full project.thanks

Which project are you looking for, let us know.

Need help on the Wireless Power Transmission…..

Kindly elaborate your query.

Hello I’m a final year student and need a project topic can you assist me with that please

Are you looking for anything specific? If you are, we can direct you to the proper project. Let us know.

Hello… Plz can i get more new and innovative ideas about electrical projects .. I ll b thankfull if i get

Hi Shirin, Are you looking for anything specific? If you are, we can direct you to the proper project. Let us know.

Something more agriculture related!

electronic related smart project needed

Plz…can i get more new electrical projects ideas which cannot be implemented still now.I’ll be thankful if I get.

i am 6 semester student i want idea for final year project if u can give me idea about power generation

have u got an idea??????

Hello…..can I get a project that will send a text massage to specified phone numbers when there is a feeder outage in a distribution substation. Please I need your help cause I am an electrical student pursuing bachelor degree in electrical and electronics.

hi am joe frm gh..pls dont u guys have any progect on reneawble energy

Hi, You can search the projects from the search bar given at the upper right corner of the website with keywords like solar, wind turbine etc.

Sir, farmers are dying because of electric shocks while watering the field. I wanna do project such that it should be helpful them. Help me sir

something related to core electrical without use micro controller

hey I need a project topic construct of forward and reverse starter

I need a special projects so that it can help me in my master study in electrical engineering..

sir/mam i’m looking for an embedded system based major project based on very new idea.. plzzz…help me,

good day pls how do i get recents power related projects .am a PGD ELECTRICAL ENGINEERING STUDENT

I want new ideas about electrical projects ..

Hi sir/mam can I get more project ideas related to the agricultural.

I’m doing my mini project… I liked the idea of smart cro probe…can u help me with full project details.. Please

I need the new electrical based projects without microcontroller

i need the new harmonics filters projects full project details

Comment: Machine Vital Card

A project am working on to be able to monitor various machine operation parameters I.e. temperature, vibrations, stability and operational integrity. able to control any system abnormalities through electrical mitigation and intermittently send data to an off site PC. please help

haue u done this project???????/?// broo

I want Power reduction project for a production plant… can u please guide which project will help to reduce power . this can be Globely also…means what other industries doing there best in terms of power saving..

Hello Namasate sir/madam can get any new electrical project ideas on which i can work on it as i am great need of project ideas please help me sir/madam I hope you will do the needful

I want more details about password based circuit breaker.please help me with that.

I want your help to my final year individual project ..please give me good topics for that

I have 1 idea Sir I think it is a audio base active system where we can speak start up the gadjets like TV fan lights etc will be start automatically when the voice can be recognised it. I hope this idea can be like u Sir

its an old idea …siri and google assistant is available in market , and is functional in many smart homes in many areas..Thanks

Please sir, help me with electrical project topics on power, for ND level sir

hello sir, the I dears presented here are just amazing. however, am having project which I want build a circuit which should be functioning as a fuse but it shouldn’t burn out when times of over and undervoltage comes.

Could you please be clear on your query?

Looking for a electrotech project to achieve my b tech

Electronics4u is the Best platform to know about the world electronics .

Can i get some projects related to power for my fyp??

Hello i am studying in embedded system. I need a topic related to Hardware development along with testing, Research and development. Please can you suggest me some topics?

Good day , I’m an electrical engineering in need for thesis topic

Comment: please help us with B Sc/ HND final year project.

I’m james an electrical engineering student please I need you’re idea for our thesis.we want a not very hard to make but nice idea.please

Thank u v. much. They are really very good and useful projects. They can be done as graduation projects for Physics and Engineering students.

hello sir, im Bello an electrical engineering student, wanna know if you can help me on my graduation project of designing remote control device based on single chip microcomputer. any advices or help thank you

I want to start a project on “AUTOMATIC ANCHOR LIGHT” bt I don’t know where to start this project & also how to do this project. I want you to suggest me a right possible way to do this project. It will be very greatful to you sir.

It’s really helpful. Thank you so much. Pls I need help on how to step up DC.

i am final year student in electrical engineering please suggest a new ideals related to electrical project

We have added several projects on this page, please have a look: https://www.electronicsforu.com/category/electronics-projects/hardware-diy

could you please suggest me a final year project topic related to power system or renewable energy?

Is electronic engineering d same thing as electrical electronic engineering

Apart from that, Wireless Power Transmission is one of the great technology in electrical engineering which will change the world.

hello , sir you have provide better idea , but i want new inovatives idea about agriculture bcoz we need to build our word

I need something related to core electrical without using micro controller

You can check all the projects here .

Very interesting blog..looking forward to see more

That’s really a lot of ideas. Thanks for sharing

Thank you for your valuable feedback.

hi Everyone please help find a simple research topic with a clear promble statement

Overload protection of a transformer.please can it be a final year project work, and how would that be

SHARE YOUR THOUGHTS & COMMENTS Cancel reply

Log in to leave a comment

Mobile Hotspot/Tethering Unit Charging Using ESP Rain Maker App

Smart panelising: the art of saving pcb cost, warehousing reimagined with technologies shaping the future of logistics, fundamentals of signal integrity in high-speed electrical design, unique diy projects, micro sized chatgpt cheating device, gps based speedometer for cars and bicycles, building espflix – an open-source ott streaming device with esp32, smallest gps tracker, electronics news, oscilloscope speeds up debugging, improved touch sensation in virtual reality, muscle-powered leg outperforms traditional motors, ultrafast digitizers for neutrino detection, truly innovative electronics, antenna interference countermeasures for wearables, a machine vision sensing solution for smart applications, integrated current sensors with reinforced isolation, world’s first ai-powered hearing aid, latest diy videos, live diy: how to make led strip dimmer and call bell, smart & efficient solutions for air purifiers and ceiling fans, make your own street light cum porch light, make your own arduino clock using ds3231 rtc module, electronics components, inductors boost power in vehicles and industry, transistor technology with hot carrier generation mechanism, compact automotive-grade esd protection diode, electronics jobs, job: service engineer at siemens in bengaluru, job: field service trainee at cytiva in pune and kolkata, job: electronics hardware, technical expert at schneider electric in bengaluru, job: field service engineer at hitachi in bengaluru, calculators for electronics, microstrip crosstalk calculator, microstrip patch antenna calculator, balanced attenuator calculator, stripline crosstalk calculator.

Network Consists of Further Focused Websites (Channels)

Inspired by our flagship publication

Electronics for you.

• Sample For Free
• Subscribe For Print
• Subscribe For Ezine

CHECKED OUT EFY EXPRESS?

• READ E-ZINE

© Copyright 2024 - EFY Group

Shipping Policy | Contact us | Terms & conditions | Privacy policy | Cancellation/Refund Policy

Sciencing_Icons_Science SCIENCE

Sciencing_icons_biology biology, sciencing_icons_cells cells, sciencing_icons_molecular molecular, sciencing_icons_microorganisms microorganisms, sciencing_icons_genetics genetics, sciencing_icons_human body human body, sciencing_icons_ecology ecology, sciencing_icons_chemistry chemistry, sciencing_icons_atomic &amp; molecular structure atomic & molecular structure, sciencing_icons_bonds bonds, sciencing_icons_reactions reactions, sciencing_icons_stoichiometry stoichiometry, sciencing_icons_solutions solutions, sciencing_icons_acids &amp; bases acids & bases, sciencing_icons_thermodynamics thermodynamics, sciencing_icons_organic chemistry organic chemistry, sciencing_icons_physics physics, sciencing_icons_fundamentals-physics fundamentals, sciencing_icons_electronics electronics, sciencing_icons_waves waves, sciencing_icons_energy energy, sciencing_icons_fluid fluid, sciencing_icons_astronomy astronomy, sciencing_icons_geology geology, sciencing_icons_fundamentals-geology fundamentals, sciencing_icons_minerals &amp; rocks minerals & rocks, sciencing_icons_earth scructure earth structure, sciencing_icons_fossils fossils, sciencing_icons_natural disasters natural disasters, sciencing_icons_nature nature, sciencing_icons_ecosystems ecosystems, sciencing_icons_environment environment, sciencing_icons_insects insects, sciencing_icons_plants &amp; mushrooms plants & mushrooms, sciencing_icons_animals animals, sciencing_icons_math math, sciencing_icons_arithmetic arithmetic, sciencing_icons_addition &amp; subtraction addition & subtraction, sciencing_icons_multiplication &amp; division multiplication & division, sciencing_icons_decimals decimals, sciencing_icons_fractions fractions, sciencing_icons_conversions conversions, sciencing_icons_algebra algebra, sciencing_icons_working with units working with units, sciencing_icons_equations &amp; expressions equations & expressions, sciencing_icons_ratios &amp; proportions ratios & proportions, sciencing_icons_inequalities inequalities, sciencing_icons_exponents &amp; logarithms exponents & logarithms, sciencing_icons_factorization factorization, sciencing_icons_functions functions, sciencing_icons_linear equations linear equations, sciencing_icons_graphs graphs, sciencing_icons_quadratics quadratics, sciencing_icons_polynomials polynomials, sciencing_icons_geometry geometry, sciencing_icons_fundamentals-geometry fundamentals, sciencing_icons_cartesian cartesian, sciencing_icons_circles circles, sciencing_icons_solids solids, sciencing_icons_trigonometry trigonometry, sciencing_icons_probability-statistics probability & statistics, sciencing_icons_mean-median-mode mean/median/mode, sciencing_icons_independent-dependent variables independent/dependent variables, sciencing_icons_deviation deviation, sciencing_icons_correlation correlation, sciencing_icons_sampling sampling, sciencing_icons_distributions distributions, sciencing_icons_probability probability, sciencing_icons_calculus calculus, sciencing_icons_differentiation-integration differentiation/integration, sciencing_icons_application application, sciencing_icons_projects projects, sciencing_icons_news news.

• Share Tweet Email Print
• Home ⋅
• Science Fair Project Ideas for Kids, Middle & High School Students ⋅

Electrical Engineering Capstone Project Ideas

College Projects in Electronics

A capstone project for an electrical engineering student involves extensive research. The project is designed for the student to demonstrate a thorough knowledge of the course work. Projects such as designing an electrical generator, an electric motorcycle, a red light detector or a controller to rotate a solar panel are some of the capstone project ideas for electrical engineering students. These capstone projects help the student to demonstrate his competence in his field, while at the same time giving him a platform to interpret and apply classroom information to real life engineering solutions.

Portable Emergency Generator

Try a capstone project that is relevant to a community service. Designing a portable electrical generator that can be powered by a standard bicycle is a capstone project idea that can be tried by students who have interest in community service. A generator which creates electricity using the drive train of a bicycle can be used in areas where unplanned electricity power outages are likely. This kind of device has commercial applications, and requires the students to overcome a number of practical engineering obstacles.

Electric Hybrid Motorcycle

Another ecologically friendly capstone project is to design a motorcycle that operates on an electric motor rather than an internal combustion engine. This project has immediate applications in the community, and requires the student to answer many electrical engineering criteria. An electric motor controller can also be designed to regulate the power used by the motor, and the electric cycle could even be adapted with solar cells to recharge the cycle when not in use, or while driving down the road. The systems required to design this electric motor hybrid motorcycle helps the students to understand her field clearly.

Red Traffic Light Detector

A red traffic light detector is another capstone project idea for electrical engineering students. The red light detector system has direct application to the automotive industry. The warning system is designed to warn drivers of an impending red light when they are driving. This project can help save the lives of pedestrians, and protect drivers from accidents caused by inattentiveness to traffic light changes. The detector system would alert the driver when he approached a red light at an unsafe speed, or approaches a light that will turn red as the driver approaches.

Directional Control for Solar Panels

In order for solar panel efficiency to be optimized they should always be directly pointed at the sun. Direct exposure to the sun's rays allow the panels to absorb the maximum amount of heat energy. A capstone project could involve designing a controller that rotates the solar panel on dual axis. This project keeps the solar panel pointed at the sun and thereby maximizes the power generated. This project would involve taking into consideration hazardous conditions such as high winds, heavy snowfall and other inclement weather.

Related Articles

Plc project ideas, projects for electrical & electronics engineering, myths of solar power, what does "invest" mean with tropical weather, strange but true: tickling your ear may slow down aging, next up for us military scientists mind-controlled..., the best raspberry pi projects for beginners, list of edison's inventions, senior project ideas for electronic engineering, high school robotics projects, electrical projects for engineering, uses of solar energy in daily life, guide to troubleshooting photocell sensors, what is the purpose of a transistor, homemade solar trackers, science fair project ideas on cars, how to use a volt meter to check portable generator..., cub cadet model 1330 specifications, electronics projects using 4047 or 4027 ic.

• University of California, Santa Barbara: Senior Capstone Projects

About the Author

Since 2003, Timothy Burns' writing has appeared in magazines, management and leadership papers. He has contributed to nationally published books and he leads the Word Weavers of West Michigan writers' group. Burns wrote "Forged in the Fire" in 2004, and has published numerous articles online. As a trained conference speaker, Burns speaks nationally on the art, science and inspiration of freelance writing.

Photo Credits

Photos.com/Photos.com/Getty Images

Find Your Next Great Science Fair Project! GO

ECE 188 Senior Capstone Projects

The Capstone Project three-course series gives Electrical and Computer Engineering students the opportunity to put their education into practice. Students, working in small teams, design, build, and present a challenging engineering design project. The design challenges, of which each team selects one to tackle, are proposed and supported by UCSB faculty research groups or by industry. Projects typically involve design and implementation of both hardware and software systems. The projects span a variety of topics in the field of electrical and computer engineering, including for example consumer electronics, embedded systems, control systems and circuits, image processing, AI / machine learning, biomedical devices, power electronics, energy generation and conversion, sensor networks, electrochemical and biological sensors, and solid-state emitters and detectors.

Every year at the end of Spring quarter, the final projects are displayed at an event with each student group participating in a project presentation and poster sessions. A panel of experts from academia and industry judges each of the teams and selects award winners.

2024 ECE 188 Senior Project Awards

ECE 188 Best Projects: Mercury, Commpact and REMED-E

EE Capstone – Award Winning Video

EE Sr. Project Spotlight: "FusionSense"

Senior project course.

Student groups integrate the knowledge and skills acquired in earlier coursework to tackle a challenging engineering design project which is proposed and supported by a UCSB faculty research group or by an industry supporter. The project is evaluated through written reports, oral presentations, and demonstrations of performance.

Electrical and Computer Engineering 188A/B/C

Instructors 2023-24: dr. ilan ben-yaacov (188abc).

188A (Fall quarter) - ECE 188A primarily focuses on the initial project design and development stage. After choosing a project, each group begins researching the critical elements of their project, developing a preliminary project plan with a set of preliminary design specifications, and gives a short preliminary presentation to the class describing their projects. Students then continue to refine their plan and begin prototyping and design testing. By the end of the quarter, each group finalizes their project plan and product design specifications, demonstrates a prototype of at least one system/element of their project, and gives a 45 minute presentation detailing (1) The Project Plan, (2) Product Design Specifications, (3) Budget, (4) Prototyping and Testing, and (5) Division of Labor (individual responsibilities).

188B (Winter quarter) - In ECE 188B, the groups continue to develop their products and refine their specifications, begin PCB design (where applicable), and at the end of the quarter demonstrate a second product prototype. Each group also participates in a "Mid-Project Design Review" with their instructors and sponsors in which they provide details on all the work done to date and provide a plan for completion of their project.

188C (Spring quarter) - In ECE 188C, the final quarter of the sequence, students finalize their designs and product specifications, and then assemble and debug their products. At the end of the quarter, each group presents and demos their final product at an ECE annual event. 

2024 EE Capstone Projects

The ECE 188 posters and presentations were held at the 2024 COE Capstone Engineering Design Expo (EDX)

Best Projects

• Excellence in EE : Mercury  – an 1/10 scale F1 race car capable of autonomously mapping and racing through any enclosed track without any human intervention
• Outstanding Innovation in EE : REMED-E  – autonomous robot for performing maintenance on naval ships
• Distinguished Technical Achievement in EE :  Commpact  – an electrically small antenna and high-impedance low-noise amplifier for low frequency communication systems

Project Descriptions

• *  SkyTerra : Elevate, Navigate, Hydrate
• *  EmberEye : Safety Beyond Sight
• *  Quickdrop : Because waiting is so yesterday
• Percept : Precision Detection for Seamless Protection
• BabyBot 2024 : Transforming Care Through Playful Automation
• Soldermatic : Precision Soldering for Quantum Innovation
• Remora : Streaming your Marine
• Mercury : Accelerating Autonomous Vehicles
• Sol-aIR Surveys : Autonomous Inspection Made Easy
• Lithoptimize : Intelligent Control for High-Performance EUV Photolithography
• Commpact : small size, BIG REACH
• REMED-E : Robots with Resolve

* Multidisciplinary Projects : Electrical Engineering and Mechanical Engineering

2023 EE Capstone Projects

The ECE 188 posters and presentations were held at the 2023 COE Capstone Expo

• Excellence in Multidisciplinary Engineering + Best Presentation : GANER
• Excellence in EE : LineAlert
• Outstanding Innovation in EE : FusionSense
• Distinguished Technical Achievement in EE : ControlSense
• EE Best VIdeo : AMPED
• * Lab D4H BabyBot: Empowering Movement at Home
• * Robot Rodeo (Navy) Ganer: Saving our Sailors
• * FLIR SafeSight: Eyes that Save Lives
• AMPED: Keep it clamped and play with AMPED
• ASML ControlSense: Twice the speed. Twice the power
• Hespanha Lab F1TENTH Velma: Finding today, Creating tomorrow
• Buckwalter / Madhow Lab FusionSense: Reliable Radar for Real-Time Results
• Smith Lab GreeNN: Reducing the Carbon Footprint of Image Classification
• Northrop Grumman LineAlert: Taking the Power Out of Wildfires
• OceanPulse: Listening to the Earth's heartbeat
• SnaCoil: Lie down, Heal up
• Manjunath Lab StressNet: Success is stress-free

* Multidisciplinary Projects: Electrical Engineering and Mechanical Engineering

 2022 EE Capstone Projects

The ECE 188 posters and presentations were held at the 2022 COE Capstone Expo

Recording of the 2022 Project Presentations

• 1st place :  Mimmo  ( Madhow  &  Buckwalter  Labs)
• 2nd place :  B.A.I.  ( S.L. Smith Lab )
• 3rd place :  MPL  ( Theogarajan Lab )
• Multidisciplinary Project Award :   Spyglass  ( FLIR )
• Faculty Choice Award:   DropVision  ( ASML )
• Beehive (Alizadeh Lab): an algorithm that manages a fleet of autonomous vehicles for ride sharing service
• Unlimited Vision (Arthrex): an enhanced instrument imaging system for arthroscopic surgery that tackles supplemental surgical awareness
• DropVision (ASML): an algorithm that examines vaporized plasma droplet images to evaluate and determine its performance in EUV lithography
• * Babybot (Lab D4H): project description coming soon!
• neutronomous (Hespanha Group): a one-tenth scale autonomous car using real-time perception and control to navigate to its destination on a college campus
• * Spyglass (FLIR): a stabilized visible and infrared camera system geared towards day and night sailing
• * TRILOW-G (Hawkes Lab): Payload for lunar gravity sub-orbital spaceflight to demonstrate the performance of a novel, bio-inspired, soft-robotic anchoring device for use in granular media
• TD-75 (HGH): a low-cost temperature calibration device that reduces error in thermal imaging devices
• Hortibeam (Horticulture Lighting): a platform for developing a laser based horticultural lighting system that can provide optimized light for plant growth without the detrimental heat generation of LED and lamp based lighting systems.
• Mimmo (MIMO): a distributed MIMO radar system pushing the boundaries of automative safety
• PiLC (PLC/HMI): a low cost noise proof Raspberry Pi based Programmable Logic Controller
• * SAAPER (Robot Rodeo): a robot designed to autonomously maneuver through a Navy ship environment and is equipped to complete tasks along the way in order to eliminate the need for humans to be in harm’s way
• B.A.I. (Smith Lab): Optical Neural Network (B.A.I): a neural network based on optics that can classify images with low energy consumption
• MPL (Theogarajan Lab): Maskless Projection Lithography – a novel lithography process that allows the end-user to go straight from design into manufacturing devices

2021 EE Capstone Projects

• Excellence in Electrical Engineering : Hylev
• Outstanding Innovation in EE : Audi0hm
• Distinguished Technical Achievement in EE: P.A.M.A.
• Faculty Choice : SensrLink
• Best Video : P.A.M.A.
• Excellence in Multidisciplinary Engineering : Ionic Skies
• Audi0hm: a device that allows a guitarist to pair their guitar to any common bluetooth speaker and play in realtime
• Auto Path: a smart robot equipped with built-in route finding algorithms and motion controls that enable itself to guide it to any designated spots
• *Civil Robotics: an electric vehicle that traverses rough terrain and clears a 6 to 9 ft. path from flashy fuels to contain brush fires
• Hylev: configurable research and testing platform for low power magnetic levitation
• *Ionic Skies: a new type of aircraft that will completely solve the drone buzzing and noisy problems
• *Lab D4H Babybot: an automated at-home ball therapy tool that circumvents the cost and limitations of a cerebral palsy household
• MyLigraphy: a maskless lithography system that is more appropriate for situations where the use of a reflective mask is inefficient
• P.A.M.A.: Personal Automated Medication Assistant - an app with tabulated medication information schedule for users
• Panterra: a UGV that navigates to its destination autonomously through various obstacles and stores a map of the GPS coordinates
• ASML ReTina: a high-speed algorithm to efficiently identify droplets from images captured by cameras in a lithography machine>
• Senseeker SensrLink: a VCO based ADC topology to address analog scaling issues by using circuit blocks created digital circuits to perform analog functions
• Stacking Solutions: collaborative robotics/multi-agent robotics
• +1 805.893.5364
• [email protected]
• Office Harold Frank Hall, Rm 4155

Dept. Resources

•  Services & Support
•  Cntrl Admin Office (CAO)
•  Electronics Shop
•  Teaching Cleanroom
•  Technical Support
• Room Reservations
•  Submit  Event | News  | Book
• Information
• Terms of Use

Department of Electrical and Computer Engineering College of Engineering • UC Santa Barbara 2024 © Regents of the University of California

Best Capstone Project Ideas for Engineering Students

“Projects that we have completed demonstrate what we know-future projects decide what we will learn”

                                                                        -Dr. Mohsin Tiwana

We learn more from life from the things that we experience than from the things that we read in books and classes because theoretical knowledge doesn't give us practical experiences. That is why we need to do projects, and when it comes to doing engineering, then doing projects is must, I mean If you have put those 4 years of your life in learning engineering and its subjects then what is its use If you can’t work on a project by using and upgrading your project?

So, the next thing that haunts each one of us before thinking of doing something new is where to start from?

Well, then you are at the right place because here I am going to discuss with you some good capstone or let's say it some good capstone engineering projects that you can have a good time with!

Have you checked out our projects on Mechanical yet? Mechanical Kit will be shipped to you and you can build using tutorials. You can start with a free demo today!

1. 3D Printer

2. Automobile Prototyping

3. CNC Machine using Arduino

4. Project Management with Primavera

So, Are You Ready For It!

Learn more about capstone projects

What is a capstone Project in Engineering?

A capstone project is the research work of a student for a year or more, in which the student selects a particular topic and does the required research by gaining information from all the possible sources that he/she can.

This lets the student in having a better understanding of the subject and give an edge over others because others have just studied theoretical skills but you have gone in-depth and understood the subject.

Practical experiences are always appreciated more than the theory because that’s where your real knowledge is tested.

Sounds cool! Right?

Now, let’s come to some best capstone engineering project ideas!

Explore more capstone projects

Latest projects on Mechanical

Want to develop practical skills on Mechanical? Checkout our latest projects and start learning for free

Best capstone engineering project ideas

1. Home Automation Using IoT

Anyone who denies from the idea of automatically working homes is lying for sure because we humans are always super-duper lazy in doing households and keep looking for the easiest ways in which we don't have to work? Sounded Relatable?

Well, then we can make a capstone engineering project in which you can learn how to pair all your electronic home appliances with Bluetooth so that they can perform the given task on your own by one click or command by the simple IoT applications.

Learn more about this project

Skyfi Labs helps students develop skills in a hands-on manner through Mechanical Online Courses where you learn by building real-world projects.

You can enrol with friends and receive kits at your doorstep.

You can learn from experts, build working projects, showcase skills to the world and grab the best jobs. Start Learning Mechanical today!

2. Animatronic Hand:

What if you could create a machine that could be controlled just by your hand and finger gestures or facial expressions or a robot intimating animal.

Well, such robots are called Animatronic Hand!

These also imitate humans and animals.

This capstone engineering project will help you in understanding the making and working of this Animatronic Hand

By working on servo motors which will act as actuators with the design, fabrication and flex sensors,

You will also get to work with Ardunio Architecture and its programming

3. Smart Energy Meter using GSM:

The generation and supply of electrical energy are one of the widest used applications of electrical engineering.

This capstone engineering project is a great learning source for the students who want to go in the field of energy generation and control and talking about this smart energy meter then this is called smart because it keeps and gives the record of total energy consumed and the energy lost via sending SMS periodically so that the unnecessary loss of  energy can be avoided

This project also involves Arduino Architecture and its Programming. Along with it, you will learn about the electrical loads and measurement and the working and the application of the GSM technology.

4. Home Automation System:

Home automation is a kind of project you will always have fun working with, this project is unlike the earlier discussed Home automation project, as it has so much more to learn like the system framework of home automation, then you will learn about the Bluetooth communication.

That’s all? No dear, along with this you will also learn about the relay driver circuits and also about the 8051 architecture and its programming!

5. Solar and Smart Energy Systems

The solar energy obtained from the sun’s rays is a renewable source of energy and that’s the reason Solar energy and its smart energy generation are something which will never go out of trend, at least till the earth is getting sun rays in abundance.

This is one of the reasons electrical engineering is more persued and job secured as electrical energy is also used for the generation of energy in big plants and industries.

Hence, to enhance such energy generation skills and knowledge one must learn about the  Solar energy and smart energy systems.

This project will help you in the study of the IR sensors and its applications. You will also get an idea about the Solar and Smart energy system frameworks.

Along with it, you will learn about the working of the solar panels and the application of Ardunio Architecture and its programming.

6. Automatic Solar Tracker

As discussed earlier solar energy is among the most used and most in-demand resources, and automatic solar energy tracking is an important skill to learn because not only sunlight alone matters but also obtaining it from the right direction matters to make the most out of it.

And such Electrical project helps one in gaining more and more industrial exposure and giving one an edge over others.

In this capstone project, you will learn about the working of solar energy systems, along with it you will also learn about the photoresistors in the electronic systems and will have to work with Arduino Architecture and planning.

Learn more about Automatic solar tracker

7. 3D Printer

No doubt 3D printing is the future of every developing nation and as the technology will keep on going forward the demand for the people who know 3D printing will keep on increasing.

Therefore, knowing, understanding and practising 3D printing with a self build-up 3D printer will give you an edge over others.

By working on this capstone project, you can easily print out a 3D object from a CAD model. This course involves the application of Ardunio programming with additive manufacturing and the use of RAMPS Board, SMPS &motor Driver.

8. Smart Traffic Lightening Systems:

The traffic in the world is increasing as the population of the world is increasing.

Urbanization is on the rise and day-by-day different methods and systems are getting used to making things smarter and smarter.

So, it is the same trying to be done with the traffic lights. This capstone engineering project will help you in making smart traffic lighting systems.

Any kind of Ardunio, electrical, mechanical or mechatronic projects can be picked up as a capstone project like:

• Automation with PLC
• Persistence of Vision
• PCB Manufacturing
• Health Monitoring wearable

For more information about good capstone projects for engineering you may go on the links below:

• Mechatronic capstone project
• Raspberry-pi capstone project
• Electronics capstone project
• Mechanical capstone project

I hope you got some good capstone projects from this article. If you have any queries let us know in the comments section.

Join 250,000+ students from 36+ countries & develop practical skills by building projects

Get kits shipped in 24 hours. Build using online tutorials.

Blogs you might like on Mechanical

Subscribe to our blog.

Stay up-to-date and build projects on latest technologies

☎ Have a Query?

Everything begins with an idea!

Electrical Engineering Capstone Project Ideas

Electrical engineering is a branch of engineering concerned with the study and design of devices, systems and equipment which use electricity, electromagnetism, and electronics. Before students of electrical engineering can graduate from college, they will be required to do an electrical engineering capstone project. Although there are many projects ideas that students can use, they really need to be careful while choosing a specific one to use. A captivating project idea will assist students in impressing their professors and hence obtain high grades. We know that many students don’t have enough time to brainstorm for impressive projects Ideas, and we’ve decided to help them get impressive ideas easily. We have listed the best and the most impressive electrical engineering capstone project ideas below. Students will find it easy to work with all the ideas below since they are very interesting. We strongly believe that the ideas below will allow students to execute their projects without going through stress. By using the ideas below for electrical engineering capstone project, students will make the most out of their education.

• Automatic Anchor Light
• Electric hybrid motorcycle
• 1kW sine wave inverter
• Automotive computing enterprise
• Blue marble security
• Four frequency generator
• Ted traffic light detector
• Automated USB controlled power switch
• DC Panel Meter using Arduino
• Directional control for solar panels
• Solar Panel Charge Controller
• High Power LED Stroboscope
• Linear Timer For General Use
• Power-Saving Relay Driver
• Wireless communication enterprise
• Plus-Minus 12V Supply From 9V Battery
• Configurable RS232
• High-Impedance Audio Buffer
• TTL to I2C Adapter
• PIN Diode Based Fire Sensor
• Wireless Power Transfer
• Portable emergency generator
• Dual Axis Solar Tracker System
• Single-stage amplifier using C++
• Infrared Motion-Sensing Relay Switch
• Low-cost LPG Leakage Detector
• Vibration Activated Smart CRO Probe
• 2 channel multi-mode audio amplifier
• 2 channel video and audio sequencer
• Password-Based Circuit Breaker
• Low-Cost Dusk-Dawn Controller
• Efficient Mini Inverter
• 3 Phase Induction Motor
• Visitor Sensing Welcome Mat
• Fire Detection and Alarm
• Automated Smoking Zone Monitoring And Alerting
• Advanced Wireless Power Transfer System
• Smart Portable Cell Phone Jammer
• Power Supply With Auto-Switching
• Emergency Auto Led Light
• Voltage Multiplier Circuit Microcontroller
• Accurate Room Temperature Controller
• Four Quadrant DC Motor Control
• Activity Automation Using Programmable Switching
• Multi-Power Supply Using 3 Separate Sources For Uninterruptible Power Supply Cycle
• ATMEGA Microcontroller based Power Saver
• CPWM Control System for Induction Motor
• Smartwatch for Seniors
• Smart Charger Monitoring System That Uses Arduino
• IOT based Smart Radiation Monitoring System
• IOT Based Automatic Road Accident Detection
• Rotating Solar Inverter
• RFID Based Water Pump Automation System
• IOT Based Heart Monitoring System
• IOT based Fire Alarm System using Raspberry Pi
• Dual Axis Solar Tracking System
• Dual Axis Weather Sensor
• AC Power Strength Controller System
• Face Recognition Door Lock System That Uses Raspberry Pi
• Automatic Road Reflector Light
• Vertical Axis Wind Turbine With Inverter
• Auto Water Pump Switcher
• Direction Controller and Induction Motor Speed
• Digitally Controlled Home Automation
• Grid-Tie Rotating Solar Rooftop System
• Hybrid Inverter
• Wireless Mobile Charging
• Switching Load By Touch
• Under Voltage and  Over Voltage Load Protection
• Protecting Induction Motor From Temperature
• Generating DC High Voltage With Marx Generator
• Mini Windmill Power Generation
• Dual Power Generation Solar
• 6 Volt DC to 12 Volt DC Converter
• Ac to DC Using Voltage Multiplier Circuit
• Smart Wireless Battery Charging
• Windmill Generator
• Single Phase Induction Motor
• Testing The Life Cycle Of Electrical Loads With Counter
• Controlling Solar Energy Charge
• System To Measure Solar Power
• Configurable Password Security System
• Load Control System Using DTMF
• Supervisory Controlling For Remote Industry
• Flexible Ac Transmitter System That Uses TSR
• Data Acquisition  For Remote Industry
• Double Phase Induction Motor With Smooth Start
• Lamp Illumination Control With Precision
• Load Shedding Time Management That Has A Programmable Interface
• Cycle Switching For Industrial Power Control
• Device Load Monitor That Has A Programmable Meter For Auditing Energy
• AC Power Controller That Has A Programmable Interface
• Industry Power Consumption Penalty Minimization That Uses AFPC Unit Project
• Commercial Power Saver
• Smart Burglar Alarm
• Wireless FM Transmitter Mic
• Wireless Cell Phone Detection System
• Automated Night Lighting System
• Clap Based Fan Switching System
• Plant Moisture Monitoring System
• Sound Operated Timer Project
• Wireless Doorbell Calling System

Have top experts do your papers.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

2024 Electrical & Computer Engineering Capstone Designs

Territorial acknowledgement.

The Electrical and Computer Engineering program acknowledges that much of our work takes place on the traditional territory of the Neutral, Anishinaabeg and Haudenosaunee peoples. Our main campus is situated on the Haldimand Tract, the land granted to the Six Nations that includes six miles on each side of the Grand River. Our active work toward reconciliation takes place across our campuses through research, learning, teaching, and community building, and is co-ordinated within the Office of Indigenous Relations.

A MESSAGE FROM THE PROGRAM DIRECTOR AND CHAIR  

Kankar Bhattacharya Professor and Chair

Dear Electrical Engineering and Computer Engineering Graduating Class of 2024, 

As you finalize your Capstone Design Projects for the Symposium on March 13, 2024, take a moment to look back and appreciate how resilient you all have been, to continue with a major portion of your degree program’s work and study terms through the global pandemic of Covid-19, and come out of it successfully. I am sure all of us have become more compassionate, understanding and aware of the society around us. At this juncture of the ECE Fourth Year Design Symposium it is indeed a time to celebrate your achievements. 

You have put in late hours preparing for the courses’ mid-terms, assignments and final exams over the past five years, while this Capstone Design Project is one of the few which provided you the opportunity to work on an open-ended design project. I eagerly look forward to walking around the display booths of our ECE Capstone Design Projects and see your innovative minds, creativity and talents at work. 

Do enjoy showing off your work to all of our symposium attendees, who come from all across the university community, from the industry, and your families. And take pride in a job well done!  

The ECE Department is very proud of all of you and we wish you the very best of successes on this wonderful day! 

Kankar Bhattacharya  Professor & ECE Department Chair 

CAPSTONE DESIGN PARTICIPANTS  

1. ​​​​​​ Community Compass 2.  Polaris Projector 3.  ResuMate 4.  CrowdQuote 5.  AI Insulator Inspector 6.  Classimple 8.  ActivityFlow 9.  Wizard GM 10.  Theraplay  11.  Voyager  12.  SolarSaver 13.  ChromaScape 14.  Motion Capture Lite 15.  Braille Radar 16.  DriveGuard 17.  Tempo Tracks 18.  BLock 19.  SoulScribeAI 20.  BOTanical 21.  Reeltime 22.  FridgeBuddy

23.  SmartFlagger 24.  RoomEase 25.  Who? Wat? Where? 26. AutoGlide 27. Easy Eats 28.  Check Me Out 29.  Indoor Wireless Positioning and Navigation System 30.  ZenAudio 31.  SoleQuest 32. Sight Through Sound 33. FinEval 34. FitCheck 35. Voxogram 36. Calamity 37. Pigeon 38. VisiWarn: Wearable Obstacle Alert 39. MoistureMapper 40. KeeperVision 41. MockMe.ai: Personalized Mock Interviewing Platform 42. CampusAlert 43. ProtoShell

44. GraphIt 45. PADAS (Portable Advanced Driver Assistance System) 46. Colorize: An MR Aid for Colour Blindness 47. Fink 48. LineRef 49. WatSat: The Satellite Smartphone Add-On 50. MediVault 51. MyHealth 52. PresGo 53. CuttleCal 54. Flourish 55. ByteBucks 56. FitCam 57. TypeCash 58. PerfectSip 60. Foodie 61. Medibot Team 62. LOTTA 63. FlexFlow 64. DrinkMaster: A Smart Bartending Machine 

65. StreetSmart 66. Serendipity 67. OtterTuner 68. ProcrastiFighter: Task Kickstart for Students 69. FriendTube 70. Waterloo Drivers App 71. FeedMe 72. GeniVision 73. AutoHelm 74. AR Bytes 75. HandSense 76. Stratosphere 77. Project Pulse 78. Team Nexus 79. MeetWise 80. GuidingLite 81. AiNalog 82. SmARt Deck 84. InsulatorVision: Deep Learning Fault-Detection 85. CoastalQ 86. Tripsynced

1. Community Compass

 Aditya Nair, Vatsal Patel, Ian Rokas, Sid Sudhir, Frank Yan

Community Compass, aims to foster community cohesion and enhance safety by enabling users to report incidents and create local events. With an intuitive interface, Community Compass empowers individuals to actively participate in their neighborhoods. Members can promptly report incidents, such as safety concerns or suspicious activities, allowing users to stay informed and vigilant. Additionally, the app facilitates event creation, encouraging residents to organize events that improve community cohesion. By promoting communication and collaboration, Community Compass strives to create safer, united, and thriving communities.

2. Polaris Projector

Jenny Chen, Phoebe Luo, Hamza Sayed-Ali, Kelly Tan

Moving is deemed among the top five most stressful life events. Taking down all your wall decorations and placing them back up in your new home is very difficult and time consuming. The objective of our project is to design a wall décor placement assistant, using a projector, camera, distance sensors and image processing, to project images of your wall decorations onto the wall, to scale and perfectly level no matter how the projector is placed.

3. ResuMate

Arsh Ahluwalia, Jacob Au, Drasti Mehta, Anda Su, Jason Wang

In today's competitive job market, applicants want to know how employers are evaluating their applications. Imagine having a powerful tool that accurately parses, just like Applicant Tracking Systems (ATS) used by employers, and displays your resume's key information to you in a matter of seconds. ResuMate is precisely that tool - a user-friendly web application designed to optimize your resume parsing experience. By leveraging our team's knowledge of web development, data processing, parsing, and algorithm design, ResuMate offers a free and easily accessible solution.

4. CrowdQuote

Matthew Guan, Kevin Le, Andrew Li, Carl Zhang

CrowdQuote is a versatile crowd estimation system designed to provide real-time data and future predictions on the total number of people in specific locations. This data is collected from camera footage and is counted efficiently and accurately using image processing. The non-intrusive design and easy/cheap scalability means this system can be used in many situations ranging from fire safety to simply finding a quiet time to visit the library.

5. AI Insulator Inspector

Muhana Begum, Vincent Chen, Claudia Dioneda, Maria Pavlovic, Mehr Sharma, Daniel Thero

In power grids, polymer insulators leverage hydrophobic surfaces to operate; as a result, their effectiveness diminishes over time. This project focuses on developing a convolutional neural network that uses deep learning to classify these insulators, and then categorize them into the IEEE-defined levels of hydrophobicity ranging from 1 (high) to 6 (low). With augmented training datasets and select preprocessing techniques, the EfficientNetB0-based model will be able to provide timely, accurate assessments via web and mobile applications, lowering the barrier of entry to maintaining such insulators.

6. Classimple

Tiantong Hu, Jinghao Lei, Alex Xie, Yutong Yang

Classimple is a web application that addresses the challenges of course selection at the University of Waterloo by providing students with insightful information to streamline the process. It allows students to input their desired courses for the upcoming semester and presents schedules in a user-friendly calendar view and intelligently recommends related courses based on the student's academic history. Our application offers the advantage of a calendar preview feature and the generation of personalized curriculum plans tailored to each student's unique interests and academic history.

8. ActivityFlow

Henry Huang, Haoning Jin, Chris Qu, Xu Tao, Ji Wu, Jianan Wu

Activity Finder is an innovative web app for university students to post and find activities based on time and location. It offers personalized recommendations through machine learning and a diverse database system, enhancing socializing beyond academics. Unlike Facebook, it prioritizes hosting and discovering personalized activities, fostering a vibrant campus community. Challenges include user engagement, data privacy, scalability, and competition from existing platforms. Nevertheless, with the right execution, it has the potential to significantly enhance the social experience of students.

9. Wizard GM

Navya Arora, Austin Chalakkal, Vansh Mago, James Martin, Nihal Potdar

Dungeons and Dragons (D&D) as a hobby has seen a resurgence in recent years and is expected to keep growing. Our project, "AI Dungeon Master", recognizes that a capable Dungeon Master is vital for an engaging D&D experience. Unfortunately, many friend groups lack access to such dedicated individuals. To bridge this gap and make D&D more accessible, we are developing an AI-powered Dungeon Master. We aim to create an AI system that can weave stories, portray non-player characters (NPCs), manage battles, and maintain game continuity, offering an immersive text-based gaming experience.

10. Theraplay

Jocelyn Lo, Stephanie Park, Christopher Rzepka, Enel Troci

Youth often face challenges in adhering to physiotherapy routines due to lack of motivation and enjoyment, with 28% not completing their exercises. TheraPlay, an innovative app integrated with video game-based physiotherapy, aims to address this by making exercises more engaging. Utilizing myoelectric sensors, exercises control the game, providing a fun performance tracking method and encouraging a 15% improvement on average. Suitable for various skill levels, TheraPlay enhances engagement and motivation by combining therapy with interactive gaming while offering a unique, enjoyable approach to physiotherapy for youths.

11. Voyager

Joshua Lee, Jinyi Li, Justin Lu, Chris Tan, Gillian Tsoi

Voyager is an online vacation itinerary scheduling and suggestion tool whose mission is to make travel planning simpler and collaborative. Given a few parameters, the user receives a baseline itinerary they can edit as they please, and the suggestion tool is always available to help schedule events. All voyages can be shared with friends and family so that everyone can make the most of the vacation. By providing this service free of charge and readily available online, anyone can plan their dream vacation.

Samoil Petrevski

Kayshini Shan

Raghav Nitish Chandra Vobbalareddy

12. SolarSaver

Accelerating climate change has increased the innovation of technologies based on renewable energy sources. There are existing technologies that harvest solar energy on a small scale for powering low-power devices such as smartphones. However, their solar intake efficiency reduces by up to 40 percent by being stationary. The SolarSaver is a portable and low-cost structure for powering low-power devices that harvests the Sun's energy optimally through innovative sun-tracking technology.

13. ChromaScape

Hojun Choi, Ethan Dagnone, Adrien Pringle, Erin Smith

ChromaScape is a series of lights that can display arbitrary patterns according to their physical position, with an AR-like interface to control the patterns they show. The lights in the array are identified using computer vision and labelled physically, where they sit in 3D space, to make programming light arrays more accessible.

14. Motion Capture Lite

Nicolas Bao, Kevin Kalathil, Arjun Mehta, Aryaman Singh

Motion Capture techniques are used extensively in the entertainment, sports, and robotics industries, but usually require expensive and elaborate setups. Our project, "Motion Capture Lite" aims to develop a low-cost and streamlined motion-capture solution using semi-passive imperceptible LED markers ("beamers") and photosensors ("tags"). The tags detect light that is emitted by the beamers through grey-coded masks. The recorded motion data is sent to a computer, where a software tool utilizes signal processing to convert the data into a visualization.

15. Braille Radar

Justin Mendes, Andrei Paraschiv, Harsh Patel, Raven Sim, Zeen Wang

We help lead the blind to the braille. Our phone app and sensor combination allows blind users to better navigate unfamiliar indoor spaces and locate nearby braille signage. This increases their independence and confidence in navigation, without sacrificing braille literacy. The app will beep or vibrate with increasing frequency to indicate proximity. Building owners can use the companion admin app to set up and manage all of the tags within their building.

16. DriveGuard

Adshayan Balendra, Soumil Dharaskar, Preyansh Kachhia, Rishan Ratnasivam, Sathursan Santhirakumar

This project aims to create a real-time monitoring system that uses cameras to detect symptoms of distracted driving and provides timely feedback to ensure safe driving. Implemented as a mobile application, the system analyzes driver behavior for signs of inattentiveness due to unforeseen circumstances. Additionally, the app offers analytics, allowing drivers to review their journeys and gain insights to improve their driving practices. The portability of this solution sets it apart from embedded vehicle systems, making it universally applicable to any car.

17. Tempo Tracks

Garrick Clarke, Rizwan Kassamali, Alexander Ma, Matthew Panizza, Kuba Rogut, Sterlyn Tang

TempoTracks aims to help users improve their workouts by adjusting the pace of music according to their workout plan. TempoTracks will find and use the best songs from your playlists for your workout, and fine-tune the speed of the song so the user keeps up with the pace of the music. Utilizing live health data such as cadence or heart rate from smartwatches, TempoTracks can adjust the speed of the music to match the current pace with a desired goal.

Sean Chen, Rose Lin, Gary Ye, Zihe Zhang

Our project aims to establish a distributed locker booking/management system for University gyms (CIF and PAC). Users can book specific lockers, accessed within a grace period using a wireless locking mechanism. Verification will be done through a web-based platform on their cellular devices. This system aims to enhance existing locker facilities, addressing issues of first-come, first-serve access and the need for personal locks. It will improve organization, prevent item displacement, and enhance physical security.

19. SoulScribeAI

Mariac Achuoth, Saarang Agarwal, Jaishree Balamurugan, Saurodeep Majumdar, Meagan Shimonov

Statistics Canada found that around 2.3 million Canadians had unmet mental health needs due to limited access, costs, and discomfort in sharing emotions. SoulScribeAI aims to address these concerns by making therapy accessible for everyone through AI-assisted journaling. We provide empathetic and introspective responses generated by fine-tuning instruction-based large language models on proven therapy methods. SoulScribeAI provides a calm interface to enhance user experience and protects users from detrimental model responses. Additionally, our cloud infrastructure ensures scalability, fault-tolerance, and data privacy using encryption.

20. BOTanical

Shuja Agha, Akshayan Ahilan, Yahya Fahmi, Omar Salem

Weed removal is a task that must be carried out to abide by provincial laws and prevent the spread of invasive species that deteriorate the health of surrounding plants. Equipped with a camera for weed identification, the BOTanical eliminates the need for manual weed removal by carrying out the process autonomously using a mobile arm once lawn weed is identified. A comprehensive extraction procedure which minimizes the regrowth of weeds and an Android application to manage the device gives the BOTanical a competitive advantage.

21. Reeltime

Wardah Bilal, Johnny Chen, Nourish Cherish, Tazik Shahjahan, Emily Tou

Reeltime is an Automated Sports Analyzer System aimed at enhancing sports viewers' experience by automatically generating highlight reels from soccer matches. The system utilizes computer vision and deep learning techniques to identify key events, such as goals, assists and saves. A custom machine learning model, trained on video segments of important soccer events, efficiently extracts highlights. The design ensures accuracy and seamless integration while enabling sports enthusiasts to stay updated without time investment.

22. FridgeBuddy

Paul Chang, Seongkyu (Andy) Kim, Jacob Rintjema, John Yoon

In Canada, 58% of food produced is lost or wasted, with 60% of that amount being avoidable through better planning, storage and awareness. According to the WHO, a leading cause of adult disease stems from poor adolescent food and health habits. FridgeBuddy is a tool to provide young adults with healthy eating habits while reducing food waste. The service leverages Image Recognition and Label Scanning to take inventory of your food and expiration dates, and intuitively recommends recipes for the user for upcoming expiring food.

23. SmartFlagger

Geri Bylykbashi, Vinay Chaudhari, Hanu Mayilvahanan, Vraj Patel, Saleen Shahriar, Muzammiluddin Syed

SmartFlagger is an AI solution for construction firms, to automate their process of directing traffic affected by roadside construction. It uses computer vision to detect vehicles approaching a bottleneck created by a construction site, and then uses decision making algorithms to direct traffic through these sites in a manner that improves traffic throughput through the affected street. Using SmartFlagger will also provide constriction firms with the added benefit of moving skilled tradesmen and tradeswomen from directing traffic on the street to working on the site. 

24. RoomEase

Sookeong Cho, Kevin Liang, Maximus Niu, Kenneth Yang

Over 68% of Canadians in communal living situations encounter unsatisfactory experiences due to factors such as differences in lifestyles, common household responsibility disputes, and encroachment of personal and shared spaces. As housing demand rises, these issues will become more prominent.

RoomEase is a shared household management mobile application whose objective is to increase the quality of life among roommates by alleviating shared living issues, done through an implementation of a chore incentive system, a non-confrontational notification mechanism, and a user-friendly virtual assistant mediator.

Eric Bilaver

Kimberley Chong

Stephanie De Pol

Dennis Rusin

Jared Watson

Chloe Wilson

25. Who? Wat? Where?

The objective of this project is to solve navigation and information challenges faced by both new and returning students, professors, and visitors. We aim to provide a central application to navigate indoors and outdoors on campus using 360 images for orientation, and information pages for professors and classes.

26. AutoGlide

Benjamin Flack, Ethan Gilbert, Jonathan Ko, Brandon Phu

AutoGlide is an inexpensive add-on to aftermarket automobiles designed to improve vehicle control and comfort through an advanced suspension system. Using GPS, accelerometers, stepper motors, and intelligent control algorithms, AutoGlide allows the driver to directly control the suspension settings or automatically adjust them by analyzing the road conditions for optimal performance. By either lowering the stiffness on bumpier roads or tightening it for better handling on flat stretches, this project provides a more comfortable and performance-oriented ride all without having to lift the hood. 

27. Easy Eats

Justin Huynh, Pawan Iyer, Cihan Sariyildiz, Ericson So

Every year across the world, a majority of young adults struggle with food preparation. Easy Eats is an application that empowers users to efficiently access personalised & community-verified recipes that target their specific lifestyle/dietary needs. The application will store user-uploaded recipes on a centralised database, and community-verify them through a real-time feedback system. An intelligent recommendation algorithm, will rank recipes to provide the user a personalised dashboard. The application's novel and innovative approach provides accessible curated recipes to help eliminate any barriers/stigmas associated with cooking.

28. Check Me Out

Joey Chik, Feng Guo, Ricky Huang, Kyle Lee, Felix Suen

The current grocery store self-checkout system has always been rather frustrating to use. By utilizing advanced computer vision, our innovative self-checkout solution addresses many pain points with improved accuracy, reduced user interaction, and maintained cost-effectiveness. Along with seamlessly integrated conveyor belts and sensors, our system enhances detection, eliminates the need for manual item search, and significantly reduces theft. Say hello to a more straightforward, less bothersome self-checkout experience - making those grocery runs a tad less of a hassle.

Jonah Fourchalk

Shuyang Hao

Joel Kambulow

Jia Xi (Kevin) Zheng

29. Indoor Wireless Positioning and Navigation System

The objective of our project is to design and implement a mobile indoor navigation system that identifies the location of a user inside a building using WiFi signal strength data and other phone sensor data. This information is sent to a remote server, which sends predicted position information and navigation data back to the device. We use a pathfinding algorithm and statistical analysis to determine the user's likely position. Our design does not require any costly installation of new hardware unlike a Bluetooth solution.

30. ZenAudio

Jason Gill, Benjamin Rayner, Eduardo Sanchez, Sachin Sarin, Adries Shahbaz

Active noise cancelling headphones can greatly increase efficiency and productivity. As their popularity has risen, so has its price to approximately $100 for a cheaper pair that likely sacrifices sound quality and comfort. This project aims to create an attachment for existing headphones that will implement active noise cancelling at a low cost without sacrificing sound quality or comfort. Using a digital signal processing noise cancellation algorithm, ZenAudio will provide a flexible, reusable, and economical option in the active noise cancelling headphones market.

31. SoleQuest

Stuti Dave, Nour Elgawish, Sheng Fang, Rabiya Majeed, Jennifer Yun, Zulaikha Zakiullah

Motivation is a large factor in the success of rehabilitation. However, nonadherence to home rehabilitation is estimated to be as high as 50%, hindering the success of clinical results. The SoleQuest is a smart insole that, paired with a mobile device, gamifies rehabilitation programs for patients with lower limb disabilities to increase motivation and encourage training participation. This allows patients to have a gamified experience while allowing them to adhere to their rehabilitation program in an environment they are comfortable in, such as their home. 

32. Sight Through Sound

Martin Cooper, Alex He, Rene Levesque, Thomas Oliver, Juliette Rocco, Christian Traxler

In our everyday lives we often take for granted how much we rely upon our vision. From identifying the colour of our clothes, to reading the fine print on a medication bottle, "Theia", a pair of assistive glasses helps low vision users interact with their environment independently through visual question answering.  As an accessible low-cost solution, we hope to provide users vision through sound.

33. FinEval

Anweshi Anavadya, Umar Asif, Jasraj Bedi, Arham Hasan, Yousef Said

FinEval leverages Zero Knowledge Proofs (ZKP) to securely share financial data amid rising credit reliance and fraud risks. This cutting-edge solution verifies financial details without exposing sensitive information, addressing the urgent need for secure data sharing. With a ZKP prover for individuals, FinEval ensures local data authentication, minimizing exposure. This initiative boosts consumer financial health, operational efficiency, and speeds up loan approvals, offering a robust answer to the challenges of financial data protection and privacy.

34. FitCheck

Saif Hanif, Shlok Pathak, Athi Rajkumar, Huanyou Wei

Fashion empowers confidence. FitCheck serves as a style companion, igniting people's fashion inspiration. FitCheck can take a photo of clothing items people see in their day-to-day life and identify similar clothing items. Additionally, FitCheck allows people to seamlessly save any items for outfit creation and for future reference. Plus, easily share your latest fashion finds with friends for instant style approval.

35. Voxogram

Jonathan Bodner, Kayra Erisoglu-Akyildiz, Abhishek Jain, Mahima Patel

Currently, no intuitive means exist to consume digital 3D content. Traditional 2D, AR and VR technologies fall short in allowing multiple viewers to simultaneously observe objects from various angles. Voxogram seeks to change how we perceive digital 3D media. Using a rapidly-rotating screen to sweep a volume, we can precisely ""paint"" pixels of light in 3D space to produce a digital image that retains the lifelike attributes of real-world objects. 

This opens up possibilities for immersive 3D modelling, transformative video calls, and captivating art displays.

  Phillip Wu

36. Calamity

Herbert is a robot companion that links to a self-help app focused on building good habits and keeping resolutions. Users can keep Herbert healthy and happy by completing their tasks and making sure they meet their goals.

Nicole Beilis

Jugal Chitkara

Nathan Francis

Grace Nguyen

Ralph Rouhana

Pigeon is an interactive AI-powered app that empowers users to quickly understand the valuable information in municipal government data. With user-friendly representations of numeric data and curated answers, it empowers citizens to explore and understand valuable information ranging from social welfare resources to apartment building scoring. It fosters civic engagement, guiding users through popular datasets and recommending questions. Pigeon bridges the gap between constituents and local governments, creating a feedback loop for data quality and transparency.

38. VisiWarn: Wearable Obstacle Alert

Zenan Jiang, Ran Shi, Haoyu Song, Haodong Xu

VisiWarn is an affordable wearable solution designed to assist individuals with visual impairments in navigating their surroundings safely. Utilizing ultrasonic sensors, it detects obstacles and employs multiple vibration motors to alert users to the distance and direction of obstacles. The detection distance can be adjusted to accommodate both indoor and outdoor environments. Additionally, VisiWarn is equipped with the capability to capture and send images to emergency contacts in the event of a fall. 

39. MoistureMapper

Derek Jones, Nicholas Khorasani, Tanzim Pathan, Eli Propp

Golf courses spend up to $2 million annually on water management. To reduce costs and enhance playing experience, efficient water management is crucial. However, current methods such as handheld moisture sensors are expensive and imprecise. To address this, a remote sensing system would enable non-invasive and user-friendly data collection to accurately determine water content in different areas of golf greens and reduce the risk of overwatering.

40. KeeperVision

Mayuresh Gaikwad, Januston Nicholas, Sriram Nurani Viswanathan, Sumanth Subbaraman

Soccer is the most popular sport with hundreds of millions of players and fans around the world. Many times, a key save can be the difference between winning and losing a game. KeeperVision is a training tool which aims to help goalkeepers in tackling their greatest hurdle - positioning. Using computer vision, image processing, and machine learning, KeeperVision physically guides goalkeepers in real-time to the best position to defend against any incoming shots.

41. MockMe.ai: Personalized Mock Interviewing Platform

Selena Chen, Nicholas Chung-Hun, Rachel Ho, Anish Mahto, Angel Shah, Carson Tang

With 80% of engineers actively seeking new jobs, mastering interview skills is crucial. For entry-level job seekers, mock interviews are key to improvement, with 87% believing in their effectiveness. MockMe.ai aims to provide a comprehensive platform that realistically simulates engineering job interviews through tailored questions, real-time feedback, and coding hints, leveraging LLMs. It evaluates soft skills through behavioral questions generated from the resume and job description. Unlike current platforms that rely on real engineers, MockMe.ai offers unlimited personalized mock interviews for various roles.

42. CampusAlert

Timur Dauletov, Kevin Lee, Eva Liu, Janko Strizak

Current campus emergency mechanisms fall short of information-era expectations, lacking responsiveness and clarity. Protocols like lockdowns are often unclear to those in danger. We aim to develop a campus-specific threat management software. It includes a mobile app for reporting threats and guiding individuals during emergencies, an admin panel for campus authorities to access data and statistics, and a backend system. By utilizing existing protocols and algorithms, this system enhances emergency response, making it more immediate and personalized, surpassing traditional methods like fire alarms and posters.

43. ProtoShell

Harry He, Samuel Liu, Adrian Salvador, Dharini Sribalaskandarajah, Jackson Xiao

The past decade has shown an immense growth in consumers entering an unregulated digital realm. ProtoShell implements a third-party protocol between the user and the company which adds a permission layer necessitating the company to request access to the data they collect on users. This grants users the ability to lock access to their data through the ProtoShell platform, enabling informed consent and awareness on corporate data collection while building stronger trust between companies and consumers.

44. GraphIt

Md Nafis Abedin, Sabeeh Malik, Ali Naqvi, Marwan Nasar, Neel Patel, Satavanan Senthuran

In the rapidly growing field of data science and analytics, the increasing number of connected tools, users, and technologies necessitates efficient data visualization. For example, Facebook generates 4 million gigabytes of data daily. This project aims to create a user-friendly tool that helps professionals and laypeople effortlessly visualize and comprehend large datasets. Existing bulky visualization tools often demand specific expertise, leading to reduced productivity. By abstracting complexities, this tool enables users to interact and visualize their data in plain English. 

45. PADAS (Portable Advanced Driver Assistance System)

Jessica Bertley, Kaveen Makumbura, Fatin Sarker, Priyanka Surendra, Tina Yu

Advanced Driver Assistance Systems (ADAS) can prevent 1.69 million injuries (about 60% of total traffic injuries). As of 2022, only 10% of cars have an ADAS, which can be very costly due to sensor technology and ongoing software development. PADAS is a portable advanced driver assistance system that uses a camera, RADAR sensor and Bluetooth to enable features such as lane departure warning, traffic light detection, object detection and blind spot detection. This system is affordable, accessible, and simple to deploy in any vehicle. 

46. Colorize: An MR Aid for Colour Blindness

Shivangi Garg, Rishi Menon, Huacheng Qin, Lamia Uddin

Around 300 million people globally suffer from colour vision deficiency, with 8% of men and 0.5% of women experiencing colour blindness. This project aims to help those individuals by designing software that uses recolouring, edge enhancement, and pattern superposition algorithms integrated into a Mixed Reality headset. The user's video feed is enhanced based on their settings, creating a customizable solution to address their type and severity of colour blindness in real-time. This technology offers fine-tuning of hue, saturation, and brightness for optimal results.

Karim Alatrash, Barry Cimring, Jahnavi Shah, Raksha Shanbhag, Jahnavi Thota, Laurent Zheng

Fink is a wireless pen stylus that tracks the user's handwriting on a user-defined surface and displays it, via Bluetooth, to any phone, tablet, or PC. The user's motion is tracked by a series of inertial measurement units, wireless ultra-wideband probes, and force sensors. The motion of the pen is reconstructed in real-time and displayed to the user on their screen of choice. The user may then save their notes in the Fink App for later use.

48. LineRef

Catherine Chen, Cindy Huang, Kevin Huynh, Andrew Liu, Lokhin Wu

Human line judges in volleyball games are prone to inaccuracies in reaction time and perception, while international-level line judging systems are too expensive for typical players. LineRef's objective is to provide an accurate and affordable line-judging solution for recreational and lower-level competitions. Using computer vision, it tracks a volleyball's path and location to determine whether it lands in or out of court. Taking advantage of mobile devices, LineRef is easy to use, portable and affordable for consumers in any level of competition.

49. WatSat: The Satellite Smartphone Add-On

Ruqayyah Ali, Simon Bell, Jacob Crocker, Daniel Croos, Sara Habib, Bhavya Jain

Canada's major telecom providers only cover less than half of the country, resulting in inadequate coverage for remote regions. Natural disasters further exacerbate communication challenges, as cell service is often disrupted. To tackle these issues, our project aims to develop a smartphone add-on for reliable satellite communication in areas with limited or no internet or cellular service.  The goal is to offer affordable alternatives, ensuring accessible communication for all with efficient energy usage. 

Nizar Alrifai

Ming Liang Dai

Justin Nguyen

Vaibhav Sudhakar

50. MediVault

The MediVault is a sophisticated piece of hardware that comes equipped with a medication reminder kit and a medication tracking system. The medical reminder kit is a smart box that gives physical reminders through alarms and lighting and contains verification measures to ensure that each patient is getting their medication. Additionally, the MediVault also includes a medical tracking system that tracks the frequency of medication and optimizes the distribution of medication. Thus, allowing hospitals to have another metric that they can gauge patients' recovery with.

51. MyHealth

Han Su Kim, Chen-Yi Liu, Chen Feng Zhang, Yuan Song Zhang

Currently, only around 50% of Canadians meet the weekly physical guidelines of at least 150 minutes per week of moderate-to-vigorous intensity physical activity. About one-third of Canadians experience difficulty falling and staying asleep. Physical activity, diet, and sleep are a vital part of a healthy lifestyle and reduce the risk of health complications. The objective of this project is to design a mobile application that contains personalized schedules for workout routines, diet, and rest, along with sleep improvement and adaptive alarm features.

Jackson Enright

Justin Vuong

Every year public transportation companies lose millions of dollars due to long dwell times, fare evasion, and rider inconvenience. On busy lines, long dwell times caused by inefficient fare payment methods account for substantial delays. The objective of this project is to design a secure, contactless, no-tap fare collection system that tracks illegitimate riders and requires no interaction for riders to pay their fare. PresGo implements bluetooth low energy angle of arrival antennas and infrared sensors to detect a passenger boarding and automatically collect fares.

53. CuttleCal

Stephen Chi, Ernest Ho, Brian Nguyen, Cheng Yang Xi

Introducing CuttleCal, an advanced monitor calibration tool designed to harmonize colour settings across dual-monitor setups. This innovative solution analyzes and compares the color profiles of two monitors, providing precise data and recommendations to achieve identical color outputs. Ideal for anyone working remotely or on multiple monitors, CuttleCal ensures that colour's appear uniform, enhancing workflow and accuracy. With its user-friendly interface, you can easily adjust and set both monitors to display the same colors, ensuring a seamless and visually coherent workspace.

Anushka Garg

Christine Trac

54. Flourish

The price of grocery basics has increased 10.6% year over year with no signs of slowing down. Flourish aims to help financially conscious and low-income users save money by taking the existing couponing and flyer searching experience one step further by bringing the deals to them. Powered by data from the biggest grocery chains coupled with the implementation of a robust yet optimal price comparison algorithm, Flourish aims to help users save their time, money, and effort and optimize their overall grocery shopping experience.

55. ByteBucks

Deandre Baker, Abhyuday Bose, William Park, Lu Yao Chen

The objective of this project is to design a new data collection model that provides users transparency and financial rewards for the use of their data. This model utilizes a browser extension, allowing users to control their data collection and publish it for sale. Users can sell their data to third parties on a public blockchain network and receive cryptocurrency as a reward. This new model offers increased transparency in data exchange and the ability for users to earn royalties from their own data.

Shashank Anand Kannan

Emily Kissoon

Prisha Rathi

Gayathri Sudheer

Research reveals 41% of gym-goers get injured due to incorrect form, straining the wrong muscles or joints. The mobile app FitCam tackles this issue by tracking workout form through a phone camera, and offering real-time audio and visual feedback, guiding users to prevent injuries and optimize exercises. Unlike existing alternatives, FitCam allows for instant form improvements without interrupting the workout. This helps users of all skill levels learn exercises more effectively, maximizing their workouts and reducing their risk of injury.

Gurbir Minhas

Nisarg Shah

57. TypeCash

TypeCash is a seamless SMS money-transferring application that allows users to securely send and receive cash by sending text messages with commands. With this, users do not need any mobile apps nor do they have to authenticate their bank account every time; they simply register with their phone number and can use phone authentication methods (e.g, Face ID) to process electronic payments.

58. PerfectSip

Daniel Adams, Dalton Bown, Jia Hua Jiao, Kevin Sisjayawan, Winston So

Introducing PerfectSip - the ultimate solution for coffee enthusiasts! Many coffee drinkers resonate with the frustration of returning to a cold cup after becoming distracted. PerfectSip is a reusable coffee sleeve that collects and transmits sensor data via a Bluetooth Low Energy embedded controller to a mobile application. Experience real-time thermodynamic modelling using distributed computing, alerting users when their beverage is ready. Embrace convenience, sustainability, and unparalleled flavour - make every sip count with PerfectSip and say hello to a sustainable revolution!

Huichuan Cai, Stanley Huang, Darren Wihandi, Chuhan Xiang

The Foodie Food Review App aims to revolutionize the traditional food review landscape dominated by Yelp and Google Maps. By leveraging existing data from Yelp and Google, combined with user ordering preferences and reviews, the app will generate personalized recommendations from a machine learning model and prioritize them based on user feedback and reputations. This project seeks to address the "where to eat" dilemma and empower small businesses to compete with established restaurants, ultimately enhancing the overall dining experience for users.

Matthew Lysenko

Tianhao Wang

61. Medibot Team

This project's objective is to develop an application tackling the critical issue of medication adherence by introducing a gamified approach to the often challenging task of taking prescribed medication. Designed for parents of young patients, the app serves as a reliable tool while also incorporating a game/electronic pet feature to make the experience enjoyable for children. Our solution focuses on positive reinforcement through play, while encouraging safety and proper medication procedures. Our focus on child acceptance sets this project apart from existing solutions. 

Xueqian Qin

Shihang Wang

WAVE, a Smart HomeKit harnessing innovative image processing techniques for recognizing hand gestures, ensuring an intuitive, inclusive shift from voice commands. WAVE caters to the mute and doubles as a home-monitoring system during periods of absence. Utilizing computer vision, gesture and facial recognition, users interact using simple gestures like waving, pointing, or specific hand shapes. WAVE tailors control to individuals, tracking and recognizing users for personalized, effortless home environment manipulation.

63. FlexFlow

Dhruva Rajkumar, David Wang, Eric Yuan, Pei Zhang, Michael Zhu

FlexFlow is a smart scheduler and journaling app powered by machine learning. The user inputs their tasks and it plans out their daily schedule, stress relievers and deadlines. Tasks are analyzed using our model to determine their complexity and time commitment in order to effectively create the most functional schedule. It uses language processing and feedback from the user to analyze their mood and stress levels to better plan out their schedule to reduce overall stress levels.

64. DrinkMaster: A Smart Bartending Machine

HongFei Huang, Liam Huang, Selina Li, Yiwen Wu, Chad Zhao

DrinkMaster,  a Smart Bartending Machine, resolves the issue of lengthy bar queues and drink inconsistencies by automating and refining the pouring process. Customers enjoy personalized beverages and a diverse menu, all while a unique safety feature monitors alcohol consumption limits. This innovation reduces wait times and reliance on human labour, transforming bar service into a consistently high-quality experience.

65. StreetSmart

Anees Aissaoui, Kenneth Hung, Patricia Liu, Yixing Qie

According to CAA, over 70% of cycling accidents involve motorized vehicles, with road safety rules disrespected in 1 of 3 fatalities. As cycling popularizes, these incidents become more frequent. We aim to design a solution to reduce risks for cyclists. StreetSmart is a device attachable to a bicycle, featuring automatic brake lights and user-driven turn signals, as well as rear collision warnings using Light Detection and Ranging (LIDAR) and haptic feedback. With StreetSmart, riders can confidently navigate the roads with safety in mind.

Hangning Li

Tianyu Zhai

66. Serendipity

Serendipity is an intelligent web-based service that personalizes travel planning using artificial intelligence. It processes user preferences to generate detailed itineraries, offering travel advice, recommended attractions, and dining options. With an easy-to-use interface, robust data management, and a one-stop integration of secure transactions and real-time trip information updates, Serendipity is revolutionizing the travel planning process, making it more personalized, efficient, and user-friendly.

67. OtterTuner

Ryan Bui, Cole Gravelle, Alicia Ng, Jameson Smith, Aiden Zhang

Tuning a guitar can be tedious yet essential. Many artists opt for alternate tunings, which can be time-consuming. OtterTuner is a guitar tuning system using control theory and a motor system controlled by a microcontroller, paired with a mobile app. It automates precise tuning of all 6 strings, and offers preset storage. The main advantages of this design over other alternatives include a cleaner user interface and enhanced logical processing for tuning a guitar.

68. ProcrastiFighter: Task Kickstart for Students

Haonan Chen, Matthew Praskurnin, Tily Tu, Jianping Xu, Minhui Zhang

ProcrastiFighter is an AI-driven cross-platform to-do app designed to mitigate procrastination and enhance productivity among students. It offers adaptive task scheduling and supports collaborative studying. Users can add friends, join groups, and view their rankings. Unique features include a one-click focus timer to help users kick-start a task and an automatic task breakdown system, which divides large tasks into manageable subtasks. Each user also benefits from a personalized bot companion, which offers motivation and suggests schedule adjustments based on user feedback and study patterns.

69. FriendTube

Michael Gionet, Ayush Gupta, Luka Silobad, Jarvis Weng

YouTube's rapid growth since 2005 has posed significant challenges in meeting bandwidth requirements, especially with the surge in high-definition and 4K videos. The objective for this project is to decrease the bandwidth utilization of centralized video streaming services while still maintaining a high user experience for multiple users. Our proposed solution aims to leverage the temporal locality of trending videos, where videos recently viewed are likely to be revisited in the near future.We aim to create a decentralized video streaming service for all users.

70. Waterloo Drivers App

Sarman Aulakh, Dohyun Moon, Brian Peng, William Tam

City of Waterloo Driver Mobile App is a comprehensive city-wide traffic application that streamlines all traffic-related tasks into a single, user-friendly platform. By registering with their driver's license information, users gain access to a range of features, including receiving notifications about traffic violations and making payments directly within the application. The application will be developed primarily for mobile, incorporating Stripe's payment API for ticket transactions. The app also allows users to dispute tickets and view digital forms of evidence without having to visit a courthouse.

Alan Hu, Austin Wang, Terence Wong, Zi Zhou Yin, Wendi Zhao

FeedMe is a newsletter subscription service aimed at increasing user engagement with world news. Users receive personalized daily email digests and can explore news articles through the accompanying web application. The system sources news articles from a wide array of news outlets for diverse content, catering to people's diverse interests. The AI-powered engine enhances user retention by delivering relevant and engaging content. FeedMe elevates the newsletter subscription by leveraging user behaviour and interests for a personalized and engaging user experience.

72. GeniVision

Geordiron Decena, Hammad Khan, Yashtej Singh, Akbar Zafar

The Genie Vision Detection tool is an innovative device designed for the visually impaired to conjure their environment. It employs a camera system and real-time image processing through artificial intelligence. This tool provides audio feedback to convey information about the surroundings, aiding in navigation and awareness. It enriches the quality of life of individuals by offering a simple, and intuitive way to understand and interact with the world around them.

73. AutoHelm

Jarif Aftab, Braulio Carrion Corveira, Stefan Huang, Zaid Omer, Hans Wang

Ever had tedious or repetitive tasks when using your PC? AutoHelm is an easy-to-use program that helps users create their own automated scripts, or ""workflows"". It also offers a machine-learning chatbot that can generate workflows from plain English, which helps individuals of all technical abilities to utilize AutoHelm to its highest potential. With the offering of a marketplace function, users can share their workflow, which further helps users explore the endless things you can do with AutoHelm!

74. AR Bytes

Nathan Choi, Kevin Le, Ravinder Mangat, Matthew Tan, Anthony Truong

To tackle the growing issue of food waste in restaurants, AR Bytes is a web app allowing customers to access precise menu item visualizations through QR code scanning. Leveraging photogrammetry techniques, the platform transforms food images into immersive 3D models using augmented reality. This solution's advantage lies in tracking portion sizes, meals, leftovers and statistics, enabling cost and resource savings for restaurants, while providing customers accurate depictions of orders by using their cameras. This reduces misleading representations and reliance on verbal descriptions. 

75. HandSense

Christopher Arjune, Taimur Khan, Tony Wang, Wolfgang Windholtz

Computer usage is becoming increasingly prevalent worldwide, spurring a global increase in repetitive strain injuries (RSIs). Notably, traditional computer mouse designs are controlled using motions not natural to human physiology. HandSense is a lightweight, wearable device that facilitates computer interaction through safe and natural gestures that can be performed at any distance and angle relative to a user's computer. Motion sensors capture user movements and transmit them to their computer in real-time, while a microphone allows for the use of dictation to minimize keyboard necessity.

Muhammad Abdullah

Aditya Chilukuri

Ryan Kugler

Kabir Kundnaney

Hrishit Shah

76. Stratosphere

Cloud service providers offer a wide range of services and platforms, the extensive documentation and understanding required to effectively utilize these services can be daunting and time-consuming for those who may be new to cloud deployment. Stratosphere aims to streamline the cloud deployment process by using natural language processing, decision-making algorithms, and interactive diagrams, thereby enhancing efficiency and accessibility.

77. Project Pulse

Arib Hussain, Mahdi Rahman, Mohammad Syed Raihaan, Shazil Razzaq, Haris Waheed

In the context of modern workflows, a significant challenge arises when users must identify tasks in assignments, find information to complete tasks, and figure out how to complete these tasks in their schedules. The objective of Project Pulse is to provide an easy-to-use modern task management workflow for businesses and individuals that helps them manage time. By incorporating features such as task extraction from documents and images, AI prioritization and intelligent timeline generation, this app helps users plan their schedules and jumpstart their projects quickly.

78. Team Nexus

Daniel An, Arman Atharinejad, Brenden Wu, Daniel Yun

As students are continuing to use more online tools to enhance their learning experience, we noticed that they often have to jump between many websites and apps for different purposes such as having discussions and checking notes. This leads to more time wasted gathering information and resources. Nexus is meant to be a centralized social platform where university students can crowdsource notes, participate in Q&As and chat with other students. Students can tailor their experience by subscribing to various courses and getting personalized feeds.

79. MeetWise

Keith Choa, Jory Clements, Kaveen Kumarasinghe, Trent Stauffer

This project aims to develop a Meeting AI Assistant that enhances virtual communication by integrating with video conferencing tools. By joining meetings, transcribing voice, and performing real-time tasks, the assistant offers insights and triggers actions based on a company's knowledge bases. Advanced features include similarity searches across large documents, semantic understanding, and automatic task generation, with integrations like Jira for ticket creation and Outlook/Google Calendar for scheduling. This AI solution surpasses existing ones by providing a fully integrated, actionable service, not just transcription.

Mathew Al-Dabbah

Justin Aujla

Darren Fernandes

Lin Xuan Song

80. GuidingLite

GuidingLite arises from the challenges faced while navigating in indoor spaces, especially for visually impaired individuals, where traditional navigation aids are limited. By leveraging UWB technology, accurate and accessible indoor positioning is enabled for users. The approach involves deploying UWB anchors throughout environments to accurately triangulate user position. This technology provides real-time position updates, enabling users to reduce their reliance on assistance. Moreover, the system can be integrated with assistive technologies, such as voice-based directions, further enhancing the navigation experience without extra user-facing hardware.

81. AiNalog

Yi Hong Liu, Mingze Jin, Patrick Li, Anujan Mathisekaran, Max Zhou, Jordan de Souza

We are seeking to speed up machine learning computations while reducing power consumption by leveraging the inherent characteristics of analog computing, as opposed to the transistor-based digital approach which is nearly ubiquitous in the industry. Our solution - a custom differential mixed-signal 16-bit matrix multiplying circuit board - is particularly suited for running ML models in resource-constrained environments on the edge, where power consumption is critical. The AiNalog system is simple and can be rapidly deployed.

82. SmARt Deck

Mavelyn Breiva, Shaurya Jain, Sarah Kang, Lauren Smith

This project aims to design a physically immersive remote card game experience which quickly and correctly transmits live information about the cards played between multiple players with minimal processing. SmARt Deck is an AR card game simulator that uses image processing to identify unique patterns tied to the individual cards of a custom card deck to project the correct card faces for each player, and network communication to support live multiplayer gaming.

84. InsulatorVision: Deep Learning Fault-Detection

Abubakar Bello, Preenon Chisty, Aditya Malhotra, Saksham Manaktala, Taher Rampurawala, Arunima Singh

Detecting defects in electrical insulators is essential for mitigating disruptions of power supply systems. Failure to identify and address these defects may lead to power outages, financial losses, and even jeopardize the well-being of individuals and industries relying on stable electricity supply. To address this issue, we plan to create a device that comprises of an optical video streaming sensor that feeds data to an on-device microcontroller. The microcontroller employs machine learning techniques to predict the likelihood of a fault in the insulators.

Matthew Avolio

Samyar Goodarzi

Braden Morley

Ryam Willis

85. CoastalQ

CoastalQ addresses the escalating risks of sea level rise and storm surges to coastal properties in the face of a changing climate and unpredictable weather patterns. It provides a digital platform that allows realtors, investors, and homeowners to search an address and assess the associated risk efficiently. Utilizing high-resolution aerial photography and inundation analysis, CoastalQ ensures accurate risk evaluations without the need for extensive surveys, making it simpler for users to make informed decisions regarding coastal property investments.

86. Tripsynced

Jason (Jing Yu) Lin, Bill (Siyi) Liu, Hanen Ngai, Andy Yu

Tripsynced is a one-stop platform that simplifies the travel planning process for groups. It constructs robust itineraries made from personalized suggestions and group collaboration. Through the use of third party APIs and machine learning, tripsynced is able to provide suggestions for activities other than to walk around endlessly in circles. tripsynced erases the stress of planning and and synchronizing with a group, and optimizes flexibility for everyone involved. Whether with friends or solo, tripsynced provides a solution to create unforgettable memories around the world.  

THANK YOU  

Thank you to our course instructors.

Julius Olajos Trevor Smouter Stephen Utter  

THANK YOU TO OUR FACULTY CONSULTANTS

Haitham Amar Jeff Avery Ian Bell Slim Boumaiza Charles Clarke Michael Cooper-Stachowsky Mark Crowley Dan Davison Murray Dunne Ayman El-Hag Vincent Gaudet Grant Gunn Douglas Harder Anwar Hasan Pin-Han Ho Ada Hurst Brandon J. Dehart Florian Kerschbaum Peter Levine Hamed Majedi Steward McLachlin Pouya Mehrannia Oleg Michailovich

Andrew Morton Mohamed Naiel David Nairn Mohammed Nassar Chris Nielsen Gennaro Notomista Jinman Park Hiren Patel Ziqiang Patrick Huang Kim Pope Pascal Poupaty Derek Rayside Ali Rizvi Siby Samuel Razi Sayed George Shaker Stephen Smith Trevor Smouter Mahesh Tripunitara Yash Vardhan Pant David Wang Paul Ward Jeff Zarnett

FUTURE CAPSTONE DESIGN PROJECTS  

For more information about Electrical and Computer Engineering design projects or to inquire about joining us in future design projects, please contact: Julius N J Olajos [email protected]  

Share this page on social media:  

• Awards and Funding
• Undergraduate Teaching Assistantships
• Undergraduate Student Advising
• Peer Advisors
• Undergraduate Course List
• Opportunities
• Vancouver Summer Program
• TA Access to Canvas
• Graduate Student Advising
• Graduate Course List
• Policies and Procedures
• Biomedical Technologies
• Communication Systems
• Computer and Software Systems
• Emerging Micro/Nano Technologies
• Energy Systems
• Optimization, Learning, Control
• Graduating PhD/MASc Students
• Pets of ECE
• Societies and Clubs
• Student Teams
• Health & Wellness
• Academic Resources for Students
• Lightning Talks
• ECE Calendar
• ECE News Archive
• Graduate Student Newsletter Archive
• Past Events
• ECE Graduate and Postdoctoral Studies Student Perspective Stories
• Industry Partnerships
• Communicate with ECE
• EDII Suggestion Box
• Head’s Message
• Faculty Positions
• Staff Positions
• Safety in ECE
• Room Bookings
• Student Societies and Clubs
• Powerpoint Templates
• ECE Zoom Backgrounds

2023-2024 Design & Innovation Day Project Showcase

A capstone design project is a major component of our engineering curriculum. capstone students will design a product/service of significance, and solve an open-ended problem in electrical or computer engineering., students must register to the specific capstone project course related to their program and option, as the nature of the projects offered will be different. , are you a member of industry interested in getting involved to find out more please visit our  call for capstone proposals  page, or to learn more about submitting a project proposal visit our project submission page ., interested in seeing some of our past capstone projects see some of the award winning projects from 2020 below, and check out the 2022/2023 and 2021/2022 capstone award winners.

CPEN 491 Computer Engineering Capstone Design Project

Elec 491 electrical engineering capstone design project , elec 494 biomedical engineering capstone design project, take a look at some previous year’s projects: 2021 ,  2020 , and  2019 ., some of the skills gained through participation in a capstone project:, – work in a team, – communicate with a client, – formulate and analyze a problem, – explore and propose a solution, – manage a budget and run a cost evaluation, – present to an audience in written and verbal format , – implement and validate a working prototype of your proposed solution, course structure, capstone runs from september to april and counts for 10 credits. students are grouped into teams of four to six and focus on working with a client or customer. in many cases, the client will be from local industry or from an organization on campus., each project will be assigned an instructor, who will act as your supervisor. you may also be assigned a project mentor or advisor to provide expertise as required., you will be supplied funds for the project., two afternoons each week will be reserved for the capstone design project courses to allow for regular meetings with your supervisor for:, – progress reports, – in-class instructions, – invited lectures, – student presentations, – team meetings and work time, each student is expected to put about 260 hours of work across both terms into this project., if you know of any industry members who would like to submit a project, or if your co-op employer is interested in offering a project, please contact  [email protected]  or visit the  capstone partners  page..

• Facts and Figures
• Accreditations
• Maps and Directions
• Career Opportunities
• Student Organizations
• Computer Engineering

Capstone Design Laboratory

• Global Programs
• Engineering Honors
• Admissions and Aid
• Scholarships and Financial Aid
• Entry to a Major Process
• Research Experiences for Undergraduates
• Research Highlights

ECEN 403 and 404 are part of an industry-sponsored program which is an introduction to the design process and project engineering as practiced in industry. Student teams apply the design process by developing a project proposed by industry sponsors through test and evaluation.

Company Benefits

Students become intimately familiar with products of the company, which they advertise when discussing their project with other students. The company gets a semester-long look at some enthusiastic students, and projects are demonstrated at the end of each semester and judged by industry leaders. The greatest benefit is the company gets an innovative design.

ECEN 403 and 404 employ the WebCT course management internet portal. This provides each Capstone team with a discussion room in which the students can post questions and upload reports. Industry members use online access to answer students’ questions, gauge the progress of projects and also actively participate in guiding the student teams throughout the semester.

Sponsorship Details

The Capstone Design course is a real-world engineering project from the sponsor company. The sponsor assigns a company liaison (mentor) for the students, ideally, an engineer willing to work with students and provide equipment training if necessary. The sponsor also provides an equipment loan if the project requires special equipment. WebCT Course Management enables online access to sponsored projects. A standard donation of $15,000 is required for two-semester projects (one team usually comprises of 4-5 students; this gets reduced if more teams get sponsored). Funds support department scholarships, travel expenses and other student activities.

Program Supervisor

Stavros kalafatis.

• Professor of Practice, Electrical & Computer Engineering
• Associate Department Head, Electrical & Computer Engineering
• Office: WEB 205E
• Phone: 979-458-8429
• Email: [email protected]

ECEN 403-404 Demo Day

More ECEN 403-404 Videos

The Ohio State University

• BuckeyeLink
• Search Ohio State

Electrical and Computer Engineering Capstone Design (4900)

The Capstone Sequence is the primary culminating project of your Electrical and Computer Engineering curriculum. Carry out a formal design experience, taking you from design requirements to idea/design generation, through prototyping and testing. The sequence is intended to give you experience in the design process, bringing together and reinforcing the skills you have obtained at Ohio State.

Continue to refine your communication and teamwork skills, while being introduced to concepts in project management, which you will utilize to successfully complete your projects. The courses also touch upon important aspects of real-world engineering practice. You have five choices for your Capstone Sequence: A, B, C, D, or E.

ECE Senior Capstone Sequence Options

Click below to learn more about each capstone option.

Design with Honors Thesis Project

Capstone Design Special

Multidisciplinary Design Capstone

• Our features
• How we work

Engineering Capstone Project Ideas to Explore

This field of study seems to be rocket science. Yet, learners with a technical mindset and a deep interest in how things work can ace the course and get a degree in this area. As a rule, the final stage of studies is a capstone project. It may look like a totally new task and cause confusion in learners.

Now, what is a capstone project in engineering ? Where to find good engineering capstone project ideas? Where to seek help if you’re totally stuck? Read on to find all the answers.

What Is an Engineering Capstone Project?

When we talk about capstone project engineering students should complete, it’s the final stage of course completion. In most cases, learners are tasked with a capstone project to show how they can link theory and practice. They are required to find a real-life problem and offer competent solutions to it. The project’s duration is around one year. This time is more than enough to do extensive background research, problem identification, and writing.

Many students are afraid of this task because they think that an engineering capstone project is necessarily hard. We’d like to dispel your fears and doubts. Things are not as scary as you might think. Yet, you will need in-depth knowledge of fundamentals to ace this task.

Where to Look for Capstone Project Ideas for Engineering?

The first place to find ideas is your tutor or supervisor. These people are assigned to you as superior experts in all aspects of science. So they can help you find the right direction and formulate a topic.

You may also scan the Web to see what’s trending in your sphere now. What technologies are regarded as promising? What technical issues is the community struggling with? All of these aspects are worth researching to give your professional community real value.

Capstone Project Engineering Specifics

Now, let’s talk a little about the nuances of doing this project. What skills will you need to get it done? How does capstone differ from other science writing tasks?

The first point to keep in mind is that this task is deeply practical. In other words, you can’t just take a topic from your book and cover it in depth. You should offer a solution to a real problem that exists in the respective practices. Thus, the simplest way to go is to look around you. What issues and bottlenecks can you see? What troubles do you observe? The more attentive you are, the quicker the solution will be.

Second, you should be competent in the chosen topic. It’s hard to compose a capstone work on a subject you scarcely know. So, be realistic about the level of your knowledge. Read extensively, ask your tutor, and consult technical practitioners. Once you see the topic is clear, it’s time to sit down to capstone writing.

Engineering Capstone Project Ideas

We want to help you out and ease your work on the pending capstone project. So, we’ve hand-picked several winning capstone project ideas, including mechanical engineering, electrical engineering capstone project ideas , and some other subject areas.

Here’s a list for your quick inspiration:

Mechanical Engineering Capstone Project Ideas

• Compact, energy-efficient portable water filters in arid regions.
• Automated robotic arm design in small-scale manufacturing facilities.
• Solar energy-powered cooling vest for workers in high-temperature settings.
• Durable prosthetic limb for children.
• Vibration damping system in areas with high earthquake risks.
• Small-scale vertical wind turbine design.
• A smart waste segregation system in automation of recycling operations.
• Aerodynamic equipment for drag reduction in trucks.

Electrical Engineering Capstone Project Ideas

• Low-cost, open-source oscilloscope design.
• Propose a next-gen lithium-ion battery technology to address lifespan limitations.
• Propose innovative use of conductor-loaded ceramics.
• Design an IoT-based smart home system for optimal energy usage.
• Propose a solution to your local industrial facility’s operational problems using steam turbine prime movers.
• Create a high-efficiency solar panel with a sun-tracking feature.
• Propose an autonomous robot’s design that is operational in hazardous settings.
• How can electrical networks be protected from natural disasters?
• Design and simulation of a smart grid system.
• Create a wearable device for heart parameter monitoring.

Engineering Capstone Project Ideas High School

• Build a solar energy-powered vehicle from recycled raw materials.
• Design a rainwater harvesting system for small home garden applications.
• Create a coded LED light with specific operation parameters.
• Design a smartphone-controlled robot.
• Create a mini turbine for wind energy capture.
• Build a water filtration system using available materials in your household.
• Propose a mechanical hand design for hydraulic operations.
• Create a simple yet innovative hydroponic system for home-grown herb production.

Computer Engineering Capstone Project Ideas

• Propose a blockchain-based voting system for community elections.
• Design cybersecurity software to prevent IoT system hacking.
• Create an AI-powered personal finance management app.
• Engineer an ML model that analyzes stock prices.
• Build an AI algorithm diagnosing diseases by MRI scans.
• Suggest a deep learning algorithm in healthcare record management.
• Introduce a P2P file-sharing system that removes the need of centralized servers.
• Create a VR educational platform to use during history classes.

Industrial Engineering Capstone Project Ideas

• Propose manufacturing facility improvements for waste reduction.
• Apply IoT sensors and analytics to build a predictive maintenance app.
• Create a human-robot interaction interface for industrial activity automation.
• Engineer an ergonomic workplace solution to raise employee productivity.
• Design a lean manufacturing toolkit to improve staff onboarding.
• Create dynamic job scheduling algorithms to improve workforce allocation.
• Suggest a sustainable supply chain model to reduce your local plant’s carbon footprint.
• Build a simulated evacuation model to efficiently respond to disasters.

Get Help with Capstone Project Engineering Here

You have an opportunity to get your capstone project done week by week by the same writer according to the timeline.

We write your capstone project from the ground up and double-check it with plagiarism detection software.

We assign no general writers to your order. You are guaranteed to work with one of the top-rated PhD/MA experts in your area.

Virtual Tour

Experience University of Idaho with a virtual tour. Explore now

• Discover a Career
• Find a Major
• Experience U of I Life

More Resources

• Admitted Students
• International Students

Take Action

• Find Financial Aid
• View Deadlines
• Find Your Rep

Helping to ensure U of I is a safe and engaging place for students to learn and be successful. Read about Title IX.

Get Involved

• Clubs & Volunteer Opportunities
• Recreation and Wellbeing
• Student Government
• Student Sustainability Cooperative
• Academic Assistance
• Safety & Security
• Career Services
• Health & Wellness Services
• Register for Classes
• Dates & Deadlines
• Financial Aid
• Sustainable Solutions
• U of I Library

• Upcoming Events

Review the events calendar.

Stay Connected

• Vandal Family Newsletter
• Here We Have Idaho Magazine
• Living on Campus
• Campus Safety
• About Moscow

The largest Vandal Family reunion of the year. Check dates.

Benefits and Services

• Vandal Voyagers Program
• Vandal License Plate
• Submit Class Notes
• Make a Gift
• View Events
• Alumni Chapters
• University Magazine
• Alumni Newsletter

SlateConnect

U of I's web-based retention and advising tool provides an efficient way to guide and support students on their road to graduation. Login to SlateConnect.

Common Tools

• Administrative Procedures Manual (APM)
• Class Schedule
• OIT Tech Support
• Academic Dates & Deadlines
• U of I Retirees Association
• Faculty Senate
• Staff Council

College of Engineering

Campus locations.

Physical Address: Bruce M. Pitman Center 875 Perimeter Drive MS 4264 Moscow, ID 83844-4264 [email protected] uidaho.edu

Phone: 208-885-6111

Fax: 208-885-9119

Sponsor a Capstone Project

Sponsoring a University of Idaho College of Engineering Senior Capstone Design Project is an opportunity for industry sponsors to interact with undergraduate students, graduate teaching assistants and engineering faculty with expertise in your field.

All U of I engineering students participate in hands-on education. By sponsoring a Senior Capstone Design Project, you will observe potential student hires that could help meet future recruitment needs and introduce students to best practices in the industry for design and manufacturing.

Role of the Client or Corporate Sponsor

• Supply an engineering project for students to design, prototype and test in about eight months
• Participate in two formal design reviews and the final project presentation
• Provide a financial donation to support the project
• Deliver constructive feedback to the students
• Offer feedback to the faculty for continuous course improvement

Project Budgeting

• Projects need to be identified, scoped, and budgeted by Aug. 1 in collaboration with the respective department lead
• Materials and consumables required to execute the project
• Travel required for students to visit the sponsor/client
• Support for the graduate student teaching assistants
• Shop and lab equipment usage and maintenance

Capstone Program Contacts

Matthew Swenson Program Director Mechanical Engineering [email protected] 208-885-9029

Steven Beyerlein Mechanical Engineering [email protected] 208-885-4932

Bruce Bolden Computer Science [email protected] 208-885-5422

Dev Shrestha Biological Engineering [email protected] 208-885-7545

Feng Li Electrical and Computer Engineering [email protected] 208-885-7571

Herb Hess Electrical and Computer Engineering [email protected] 208-885-4341